HCS01.1E-W0013-A-02-B-ET-EC-EP-L4-NN-AW
HCS IndraDrive Controllers
The HCS01.1E-W0013-A-02-B-ET-EC-EP-L4-NN-AW is a HCS Drive Controller by Bosch Rexroth Indramat, part of the HCS IndraDrive Controllers Series. It offers a MultiEthernet communication interface, pairs with Control Section Design BASIC, and supports STO and SBC safety functions. Cooled via an internal blower and rated IP20, it runs on 3 x AC 110230 V 0B10% mains with a 13 A peak current. The encoder interface supports IndraDyn Hiperface/EnDat 2.1/2.2.
Technical Specifications
Communication Interface
MultiEthernet
Pairing Note
Paired with Control Section Design 'BASIC' (B)
Control Section Design Type
BASIC
Cooling Method
Air, internal (through integrated blower)
IP Rating
IP20
Design Version
1
Other Design Features
None
Interface 1 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2
Safety Interface
STO (Safe Torque Off) and SBC (Safe Brake Control)
Line Series
HCS01
Mains Voltage
3 x AC 110...230 V ±10%
Device Peak Current
13 A
Power Supply Unit
Infeeding / Feeded
Product Type
HCS Drive Controller
Frequently Asked Questions
What safety functions are implemented, and why are STO and SBC important on this unit?
The STO (Safe Torque Off) prevents unintended torque by safely removing drive enabling, while SBC (Safe Brake Control) actuates holding brakes. It mitigates coasting risks and enables simplified safety chains without external relays.
Which feedback systems are supported, and how does that affect motor choice for HCS01.1E-W0013-A-02-B-ET-EC-EP-L4-NN-AW?
The encoder interface accepts IndraDyn Hiperface and EnDat 2.1/2.2 for enabling accurate position/speed control with common Rexroth and third-party servo motors. Its mixed-encoder fleets can be standardized without changing the power section.
What mains and current ratings should be considered when sizing this controller?
The device operates on 3-phase AC 110…230 V (±10%) with a 13 A peak capability. Its limits inform short-term overload behavior, cable sizing, protective devices and transformer/UPS selection in low-power servo axes.
How does internal-air (integrated blower) cooling and IP20 influence enclosure design?
The blower promotes through-device convection, so provide clear intake/exhaust paths and derating allowances. Its IP20 implies finger protection only, while mount within a switchgear cabinet meeting environmental and contamination requirements.
Why pair Control Section Design BASIC with this HCS01.1E variant, and what does it provide?
The BASIC control section delivers essential motion functions and configuration scope without advanced option boards for lowering cost and engineering overhead. It’s a balanced fit for compact axes needing safe stop, fieldbus and encoder versatility.
Common Misspellings
HCS011EW0013A02BETECEPL4NNAW
HCS01 1E W0013 A 02 B ET EC EP L4 NN AW
hcs01.1e-w0009-a-02-b-et-ec-pb-nn-aa-fw
HCS1.1E-W0013-A-02-B-ET-EC-EP-L4-NN-AW
Internal Product Review
Bosch Rexroth produces the drive HCS01.1E-W0013-A-02-B-ET-EC-EP-L4-NN-AW with built-in MultiEthernet, STO/SBC and IndraDyn Hiperface/EnDat 2.1/2.2 within an IP20, blower-cooled design. It operates from a rated 3×AC 110–230 V ±10% supply dource and supports 13 A peak current. This drive pairs with the BASIC control section and supports infeeding/feeded topologies that makes it applicable in packaging, machine tools, printing and assembly/handling lines.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the HCS01.1E-W0013-A-02-B-ET-EC-EP-L4-NN-AW.
Want to 
