HCS01.1E-W0013-A-02-B-ET-EC-EP-S4-NN-AW
HCS IndraDrive Controllers
The Bosch Rexroth Indramat HCS01.1E-W0013-A-02-B-ET-EC-EP-S4-NN-AW drive controller is part of the HCS IndraDrive Controllers series, offering advanced motion control for industrial automation. Designed for efficient power management, it operates on a mains voltage of 3 x AC 110...230 V ±10% and delivers a device peak current of 13 A. With an IP20 rating and internal air cooling via an integrated blower, this controller provides reliable performance in standard control cabinets. The unit's primary function is to regulate servo drives in precise positioning and high-dynamic applications where consistent, high-speed control is essential.
Incorporating a MultiEthernet communication interface, the HCS01.1E-W0013-A-02-B-ET-EC-EP-S4-NN-AW ensures fast, deterministic data exchange across modern networks. The Interface 1 Type supports Encoder IndraDyn Hiperface/EnDat 2.1/2.2, enabling high-resolution feedback for tight motion loops. The device is paired with a Control Section Design Type of BASIC, designated as design version 1, with no additional design features required. As part of the HCS01 line series, this compact converter integrates the power supply unit in an infeeding/feeded configuration, optimizing cabinet space and simplifying wiring.
Built for flexible integration, the controller's pairing note specifies matching with Control Section Design "BASIC (B)", assuring compatibility across HCS Compact Converter Series modules. Its internal blower cooling method reduces maintenance demands compared to external fans or liquid systems. With robust construction and an IP20 protection level, this drive controller withstands typical industrial environments while ensuring efficient heat dissipation. The HCS01.1E-W0013-A-02-B-ET-EC-EP-S4-NN-AW enhances machine uptime, streamlines motion tasks, and delivers precise, repeatable performance, making it ideal for packaging, printing, and material handling applications.
Technical Specifications
Communication Interface
MultiEthernet
Pairing Note
Paired with Control Section Design 'BASIC' (B)
Control Section Design Type
BASIC
Cooling Method
Air, internal (through integrated blower)
IP Rating
IP20
Design Version
1
Other Design Features
None
Interface 1 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2
Line Series
HCS01
Mains Voltage
3 x AC 110...230 V ±10%
Device Peak Current
13 A
Power Supply Unit
Infeeding / Feeded
Product Type
HCS Drive Controller
Frequently Asked Questions
What supply range and cabinet conditions are required for HCS01.1E-W0013-A-02-B-ET-EC-EP-S4-NN-AW?
It operates from 3×AC 110…230 V (±10%) and is intended for IP20 cabinet installations with internal air cooling via an integrated blower. Its proper control-cabinet airflow ensures reliable thermal behavior.
Which feedback devices can the Interface 1 accept, and why does that matter for servo loops?
The HCS01 supports encoder families such as Hiperface and EnDat 2.1/2.2, among others for allowing high-resolution position feedback. It enables tight velocity/position loops and repeatable contouring with synchronous motors.
What is the device peak current and how should it be used in application sizing for HCS01.1E-W0013?
The controller provides a 13 A peak, while it is recommended to use it for covering short acceleration/torque transients while sizing to continuous current for thermal steady-state. TIt preserves dynamic response without exceeding thermal limits.
How does the internal blower cooling approach compare to external fans or liquid cooling in this series?
The integrated blower simplifies installation and maintenance by using cabinet airflow paths rather than external radiators or liquid circuits if cabinet exhaust and intake are engineered per guidance. It reduces ancillary components and wiring.
Does the HCS01.1E-W0013 variant accommodate cabinet space constraints and simplified wiring?
Yes, the IndraDrive Cs combines power and control in a single compact unit, minimizing footprint and interconnects compared to split architectures. It assists retrofits and high-density multi-axis panels.
Common Misspellings
HCS011EW0013A02BETECEPS4NNAW
HCS01 1E W0013 A 02 B ET EC EP S4 NN AW
hcs01.1e-w0009-a-02-e-s3-ec-ep-nn-nn-fw
HCS1.1E-W0013-A-02-B-ET-EC-EP-S4-NN-AW
Internal Product Review
The Bosch Rexroth Indramat’s HCS01.1E-W0013-A-02-B-ET-EC-EP-S4-NN-AW drive controller is presented with MultiEthernet port and its IP20 protection rating safeguards against external intrudes. It uses blower cooling for maintainingg ambient temperature and to afford 13 A of peak load. This drive is designed for 3×AC 110–230 V supply, with ±10% tolerance. It is ideal for intralogistics and material-handling lines that requires precise and deterministic servo regulation with Hiperface/EnDat feedback.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the HCS01.1E-W0013-A-02-B-ET-EC-EP-S4-NN-AW.
Want to 
