HCS01.1E-W0013-A-02-B-ET-EC-EP-S4-NN-FW

HCS IndraDrive Controllers

Call For Quote

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone

Part Number

+Add a message

Message

Request a Replacement

Request a Repair

Quote Both

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone:
1-888-551-3082

Email:
[email protected]

The HCS01.1E-W0013-A-02-B-ET-EC-EP-S4-NN-FW is an HCS Drive Controller from Bosch Rexroth Indramat in the HCS IndraDrive Controllers series. It features a MultiEthernet interface and supports encoder connections via IndraDyn Hiperface/EnDat 2.1/2.2. Designed with a BASIC control section paired with the Basic design, it accepts 3 x AC 110...230 V ±10% mains voltage and delivers up to 13 A peak current. Internal air cooling through an integrated blower ensures reliability, while its IP20 rating and separate firmware ordering note streamline deployment.

Technical Specifications

Communication Interface
MultiEthernet

Pairing Note
Paired with Control Section Design 'BASIC' (B)

Control Section Design Type
BASIC

Cooling Method
Air, internal (through integrated blower)

IP Rating
IP20

Design Version
1

Firmware Order Note
Firmware must be ordered as separate sub position

Other Design Features
None

Interface 1 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2

Line Series
HCS01

Mains Voltage
3 x AC 110...230 V ±10%

Device Peak Current
13 A

Power Supply Unit
Infeeding / Feeded

Product Type
HCS Drive Controller

Frequently Asked Questions

How does the MultiEthernet interface on HCS01.1E-W0013-A-02-B-ET-EC-EP-S4-NN-FW streamline PLC integration and motion coordination across mixed vendor cells?

It supports common industrial Ethernet stacks to simplify controller mapping and synchronous setpoint exchange with established PLCs. It reduces gateway hardware and shortens commissioning paths in multi-brand lines.

Which mains supplies are supported, and what implications does 3×AC 110…230 V ±10% have for global deployments?

The controller runs on worldwide low-voltage three-phase grids for tolerating typical plant variation. It simplifies stocking and reduces the need for step-up transformers when moving equipment between regions.

What encoder options does this HCS01.1E-W0013-A-02-B-ET-EC-EP-S4-NN-FW accept, and why does that matter for retrofit or mixed-axis machines?

The interfaces cover IndraDyn, Hiperface and EnDat 2.1/2.2, plus other formats via the family. Its flexibility eases migration that let the reuse of existing motors or scale to different feedback resolutions without re-engineering.

How does the internal air cooling with an integrated blower in the HCS01.1E-W0013-A-02-B-ET-EC-EP-S4-NN-FW influence cabinet design?

The forced internal airflow and IP20 construction target ventilated enclosures for reducing external heat-sink requirements. Its designers can achieve tighter layouts while maintaining thermal margins via controlled cabinet airflow.

What does the 13 A device peak current on HCS01.1E-W0013-A-02-B-ET-EC-EP-S4-NN-FW mean for axis sizing?

The peak current accommodates transient torque demands in indexing tables, short accelerations or cutter entries without oversizing the drive. Its engineers can match continuous ratings to duty cycle while keeping headroom for dynamic events.

Common Misspellings

Internal Product Review

The Indramat’s HCS01.1E-W0013-A-02-B-ET-EC-EP-S4-NN-FW drive controller couples a BASIC control section with MultiEthernet and IndraDyn/Hiperface/EnDat 2.1/2.2 feedbacks. It is rated for 3-phase 110 to 230 V ±10% and 13 A peak current. This unit possess an integrated-blower IP20 frame design to fit into machine tools, packaging, printing and automotive assembly. Its firmware ships separately.