HCS01.1E-W0013-A-02-B-ET-EC-NN-L4-NN-FW
HCS IndraDrive Controllers
The Bosch Rexroth Indramat HCS01.1E-W0013-A-02-B-ET-EC-NN-L4-NN-FW is a high-performance HCS IndraDrive Controllers unit. It offers a MultiEthernet interface, supports 3x AC 110…230 V ±10% mains voltage, and delivers a device peak current of 13 A. Featuring internal air cooling and STO (Safe Torque Off) with SBC (Safe Brake Control) safety, it complies with IP20 protection. Firmware must be ordered separately.
Technical Specifications
Communication Interface
MultiEthernet
Pairing Note
Paired with Control Section Design 'BASIC' (B)
Control Section Design Type
BASIC
Cooling Method
Air, internal (through integrated blower)
IP Rating
IP20
Design Version
1
Other Design Features
None
Interface 1 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2
Interface 2 Type
Not equipped
Safety Interface
STO (Safe Torque Off) and SBC (Safe Brake Control)
Line Series
HCS01
Mains Voltage
3 x AC 110...230 V ±10%
Device Peak Current
13 A
Power Supply Unit
Infeeding / Feeded
Product Type
HCS Drive Controller
Frequently Asked Questions
Why is internal air cooling chosen rather than liquid cooling?
The internal air cooling with integrated blower suits moderate power levels (13 A peak) and simplifies installation. It avoids external coolant plumbing and reduces maintenance in typical industrial settings.
How is the encoder communicated via IndraDyn/Hiperface in this unit?
The encoder interface (IndraDyn / Hiperface / EnDat 2.1/2.2) transmits high-resolution feedback to the controller. It ensures accurate position, velocity and torque regulation.
What is the practical implication of the IP20 rating?
The IP20 protects against solid objects exceeding 12 mm (e.g. fingers) but offers no protection from water or fine dust. It must be installed in a dry, dust-controlled enclosure.
How does the device’s 13 A peak current rating affect motor selection?
The peak current sets the maximum current available during dynamic acceleration. Its engineers will choose a servo motor whose current draw falls under that limit to maintain safe operation.
What does the “BASIC” control section signify for this unit?
The “BASIC” designation indicates a streamlined control section offering standard motion features without advanced modules. It simplifies programming and lowers cost in basic servo applications.
Common Misspellings
HCS011EW0013A02BETECNNL4NNFW
HCS01 1E W0013 A 02 B ET EC NN L4 NN FW
hcs01.1e-w0013-a-02-a-cc-ec-cn-nn-nn-fw
HCS1.1E-W0013-A-02-B-ET-EC-NN-L4-NN-FW
Internal Product Review
The control drive HCS01.1E-W0013-A-02-B-ET-EC-NN-L4-NN-FW from Bosch Rexroth provides a MultiEthernet interface with STO and SBC safety. It handles up to 13 A peak current at 3×AC 110–230 V supply. It comes with internal air cooling system for managing thermal stability and IndraDyn/Hiperface encoder for precise feedback to serve in industrial lines such as robotics and packaging control.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the HCS01.1E-W0013-A-02-B-ET-EC-NN-L4-NN-FW.
Want to 
