HCS01.1E-W0013-A-02-B-ET-EC-NN-S4-NN-FW

HCS IndraDrive Controllers

In Stock, Ships in 3-5 Days

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone

Part Number

+Add a message

Message

Request a Replacement

Request a Repair

Quote Both

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone:
1-888-551-3082

Email:
[email protected]

The HCS01.1E-W0013-A-02-B-ET-EC-NN-S4-NN-FW is a controller by Bosch Rexroth Indramat. Part of the HCS IndraDrive series, it supports MultiEthernet and internal air cooling with an integrated blower. It operates on 3×AC110–230V ±10% and delivers a peak current of 13 A. The IP20 unit requires firmware ordered separately and features BASIC control section.

Technical Specifications

Communication Interface
MultiEthernet

Pairing Note
Paired with Control Section Design 'BASIC' (B)

Control Section Design Type
BASIC

Cooling Method
Air, internal (through integrated blower)

IP Rating
IP20

Design Version
1

Firmware Order Note
Firmware must be ordered as separate sub position

Other Design Features
None

Interface 1 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2

Interface 2 Type
Not equipped

Line Series
HCS01

Mains Voltage
3 x AC 110...230 V ±10%

Device Peak Current
13 A

Power Supply Unit
Infeeding / Feeded

Product Type
HCS Drive Controller

Frequently Asked Questions

Which fieldbus options does HCS01.1E-W0013-A-02-B-ET-EC-NN-S4-NN-FW expose under “MultiEthernet,” and how are they selected?

It supports software-configurable Ethernet stacks such as Sercos III, PROFINET IO, EtherNet/IP and EtherCAT within the same hardware. It eases PLC integration without swapping option cards.

How does the integrated blower (internal air cooling) influence enclosure design for HCS01.1E-W0013-A-02-B-ET-EC-NN-S4-NN-FW?

The unit circulates air through its chassis, so provide straight intake/exhaust paths and respect IP20, it is important to use a filtered cabinet for dusty lines. Its thermal spacing plus cabinet airflow modeling helps avoid recirculation hotspots.

What encoder families are compatible with the HCS01’s multi-encoder interface, and why does it matter?

Its interfaces include IndraDyn/HIPERFACE and EnDat 2.1/2.2, among others in the Cs family. It lets the reuse of existing motors/feedbacks or mix technologies during retrofits without mechanical changes.

What peak-current behavior should I expect from the 13 A rating, and how does it translate to axis sizing? (HCS01.1E-W0013-A-02-B-ET-EC-NN-S4-NN-FW)

Its 13 A peak allows short dynamic overloads, while continuous limits depend on ambient, cooling and motor pairings. It is recommended to use Rexroth sizing tools to map motion profiles to thermal models and verify duty cycles.

What enclosure and protection considerations arise from the IP20 rating? (Product code present: HCS01.1E-W0013-A-02-B-ET-EC-NN-S4-NN-FW)

The IP20 means finger-safe only. It is important to mount in a protective cabinet with environmental sealing and maintain creepage/clearance. Use EMC gaskets as required and route motor/encoder/line filters per the manual.

Common Misspellings

Internal Product Review

Bosch Rexroth produces the HCS01.1E-W0013-A-02-B-ET-EC-NN-S4-NN-FW drive controller with BASIC section, MultiEthernet and a multi-encoder front end. It uses internal blower cooling for thermal stability and its construction is in accordance with IP20 protective rating. It requires 3 phase 110–230 V supply source, with ±10% tolerance to deliver 13 A peak current. Its typical roles span in packaging, printing, labeling and material-handling cells.