HCS01.1E-W0013-A-02-B-ET-EC-NN-SB-NN-FW
HCS IndraDrive Controllers
The HCS01.1E-W0013-A-02-B-ET-EC-NN-SB-NN-FW is a HCS Drive Controller from Bosch Rexroth Indramat, part of the HCS IndraDrive Controllers series. It features MultiEthernet communication, air internal cooling via integrated blower, and pairs with Control Section Design BASIC. Supporting 3 x AC 110...230 V ±10% mains voltage and delivering a peak current of 13 A, it offers IP20 protection and an Encoder IndraDyn Hiperface/EnDat 2.1/2.2 interface, with firmware ordered separately.
Technical Specifications
Communication Interface
MultiEthernet
Pairing Note
Paired with Control Section Design 'BASIC' (B)
Control Section Design Type
BASIC
Cooling Method
Air, internal (through integrated blower)
IP Rating
IP20
Design Version
1
Other Design Features
None
Interface 1 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2
Interface 2 Type
Not equipped
Line Series
HCS01
Mains Voltage
3 x AC 110...230 V ±10%
Device Peak Current
13 A
Power Supply Unit
Infeeding / Feeded
Product Type
HCS Drive Controller
Frequently Asked Questions
What cooling approach does this product code use, and why choose internal air with integrated blower?
It employs internal air cooling via an integrated blower for moving heat to the cabinet airflow path without external heat sinks. It simplifies enclosure design and supports dense layouts when paired with proper ducting and filter maintenance.
Does the HCS01 line support safety options applicable to this configuration, and how are they typically applied?
The HCS01 family supports integrated safety options (e.g., Safe Torque Off/Safe Motion variants) depending on ordering code, while selection is application-specific. It enables certified stop functions without external contactors on suitable architectures.
How do the IndraDyn Hiperface/EnDat 2.1/2.2 encoder interfaces improve control loop quality on HCS01.1E-W0013-A-02-B-ET-EC-NN-SB-NN-FW?
These interfaces enable high-resolution position and velocity feedback with secure serial protocols for supporting precise commutation and dynamic response. Its compatibility with common motor families streamlines commissioning and autotuning across varied axes.
How does the MultiEthernet interface benefit deterministic motion networks in mixed-vendor cells?
Its MultiEthernet supports mainstream industrial Ethernet protocols to simplify PLC integration and reducing gateway hardware in heterogeneous lines. Its engineers can standardize diagnostics and parameterization across stations while keeping motion synchronization aligned with plant network strategy.
What operating supply and current envelope does HCS01.1E-W0013-A-02-B-ET-EC-NN-SB-NN-FW accept, and how does that influence cabinet design?
It is designed for 3-phase 110–230 V ±10% mains with a 13 A device peak to enable use in low-voltage panels common to compact machines. Its IP20 construction targets enclosed control cabinets with appropriate thermal management and protective hardware.
Common Misspellings
HCS011EW0013A02BETECNNSBNNFW
HCS01 1E W0013 A 02 B ET EC NN SB NN FW
hcs01.1e-w0013-a-02-a-cc-ec-em-nn-nn-fw
HCS1.1E-W0013-A-02-B-ET-EC-NN-SB-NN-FW
Internal Product Review
Bosch Rexroth produces the HCS01.1E-W0013-A-02-B-ET-EC-NN-SB-NN-FW controller that possess support for IndraDyn Hiperface/EnDat 2.1/2.2 encoder. It relies on blower ventilation cooling and includes MultiEthernet port. It suits cabinets installation due to its IP20 protection and requires 3-phase 110–230 V supply to operate. This drive delivers 13 A of maximum current in automations systems such as handling and machine-tool cells.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the HCS01.1E-W0013-A-02-B-ET-EC-NN-SB-NN-FW.
Want to 
