HCS01.1E-W0018-A-02-A-CC-EC-CN-NN-NN-FW
HCS IndraDrive Controllers
The HCS01.1E-W0018-A-02-A-CC-EC-CN-NN-NN-FW from Bosch Rexroth Indramat features internal cooling and a peak current of 18 A. Part of the HCS IndraDrive Controllers series, it supports SERCOS III communication and internal blower cooling. It has IP20 protection and operates on 3 x AC 110...230 V supply with ±10% tolerance.
It offers multi-encoder and CANopen interfaces. It features an ADVANCED design. It ships with HAS09 and has a one-year warranty.
Technical Specifications
Communication Interface
SERCOS III master (cross communication)
Pairing Note
Paired with Control Section Design 'ADVANCED' (A)
Control Section Design Type
ADVANCED
Cooling Method
Air, internal (through integrated blower)
IP Rating
IP20
Design Version
1
Other Design Features
None
Interface 1 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2
Interface 2 Type
CANopen
Safety Interface
Not equipped
Line Series
HCS01
Mains Voltage
3 x AC 110...230 V ±10%
Device Peak Current
18 A
Power Supply Unit
Infeeding / Feeded
Product Type
HCS Drive Controller
Frequently Asked Questions
What advantages does SERCOS III cross-communication bring to HCS01.1E-W0018-A-02-A-CC-EC-CN-NN-NN-FW motion networks?
It enables deterministic, synchronized exchange between drives and controllers with low jitter to support precise coordination of axes and diagnostics in real time. Its cross-communication reduces PLC load by allowing peer-to-peer status/data exchange over the ring.
How does the internal blower cooling influence cabinet design and lifetime for HCS01.1E-W0018-A-02-A-CC-EC-CN-NN-NN-FW?
The integrated fan routes air across heat-generating components for stabilizing temperature gradients and mitigating thermal cycling of power semiconductors. It often reduces external cooling hardware and simplifies ducting/clearances within IP20 control cabinets.
Which encoder systems are supported, and why does multi-encoder capability matter on this code?
The unit accepts IndraDyn feedback plus Hiperface and EnDat 2.1/2.2, with CANopen for additional devices. Its multi-encoder options streamline retrofits and enable optimized loop tuning across motor families and feedback resolutions.
What mains supply ranges and tolerances are permissible, and how do they affect commissioning?
It operates from 3×AC 110…230 V with ±10% tolerance to allow deployment in low-voltage three-phase environments without autotransformers. Its wider tolerance eases startup where line sag or inrush-induced dips occur.
Why is the “ADVANCED” control-section pairing significant, and what should integrators verify?
It pairs with the ADVANCED (A) control section for unlocking extended functions/interfaces beyond BASIC. It is important to verify the control section’s option cards and order firmware separately per the firmware sub-position note to enable intended features.
Common Misspellings
HCS011EW0018A02ACCECCNNNNNFW
HCS01 1E W0018 A 02 A CC EC CN NN NN FW
hcs01.1e-w0013-a-02-a-cc-ec-pb-nn-nn-fw
HCS1.1E-W0018-A-02-A-CC-EC-CN-NN-NN-FW
Internal Product Review
The Bosch Rexroth Indramat’s drive controller HCS01.1E-W0018-A-02-A-CC-EC-CN-NN-NN-FW integrates an ADVANCED control section with internal blower cooling and IP20 construction. It supports SERCOS III, CANopen and multi-encoder feedback. It features a rated peak current up to 18 A and operates from a 3×AC 110–230 V source. The unit's firmware can be ordered separately and its infeeding/feeded supply variants simplifies cabinet design.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the HCS01.1E-W0018-A-02-A-CC-EC-CN-NN-NN-FW.
Want to 
