HCS01.1E-W0018-A-02-A-CC-EC-EM-NN-NN-FW

HCS IndraDrive Controllers

Call For Quote

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone

Part Number

+Add a message

Message

Request a Replacement

Request a Repair

Quote Both

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone:
1-888-551-3082

Email:
[email protected]

The HCS01.1E-W0018-A-02-A-CC-EC-EM-NN-NN-FW is a HCS Drive Controller by Bosch Rexroth Indramat in the HCS IndraDrive Controllers series. It provides a SERCOS III master interface, pairs with Control Section Design ADVANCED, using an integrated blower for air cooling. Operating at 3 x AC 110…230 V ±10% with a peak current of 18 A, it supports IndraDyn Hiperface/EnDat. Meets IP20 protection, design version 1, and requires separate firmware ordering.

Technical Specifications

Communication Interface
SERCOS III master (cross communication)

Pairing Note
Paired with Control Section Design 'ADVANCED' (A)

Control Section Design Type
ADVANCED

Cooling Method
Air, internal (through integrated blower)

IP Rating
IP20

Design Version
1

Firmware Order Note
Firmware must be ordered as separate sub position

Other Design Features
None

Interface 1 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2

Interface 2 Type
Encoder emulation

Safety Interface
Not equipped

Line Series
HCS01

Mains Voltage
3 x AC 110...230 V ±10%

Device Peak Current
18 A

Power Supply Unit
Infeeding / Feeded

Product Type
HCS Drive Controller

Frequently Asked Questions

What network/control architecture does HCS01.1E-W0018-A-02-A-CC-EC-EM-NN-NN-FW support for multi-axis coordination?

It provides a SERCOS III master interface with cross-communication for enabling deterministic motion coordination and tight cycle synchronization across drives and I/O. It suits machines needing distributed motion phases without a separate motion bus gateway.

How does the integrated blower (air cooling) affect enclosure design and thermal derating for HCS01.1E-W0018-A-02-A-CC-EC-EM-NN-NN-FW?

The internal air cooling simplifies panel thermal paths and can reduce heatsink requirements but designers must preserve intake/exhaust clearance to maintain rated current. It is recommended to follow IP20 and ambient conditions to avoid forced derating in dense cabinets.

Which encoder systems are natively handled, and why does that matter for retrofit projects?

The HCS01 supports IndraDyn multi-encoder (Hiperface/EnDat 2.1/2.2) plus encoder emulation for easing migration from legacy feedbacks or third-party motors. Its flexibility maintains loop integrity while avoiding costly motor swaps.

Why is the Control Section Design ‘ADVANCED’ relevant to motion profiles and PLC integration?

The ADVANCED control section expands processing and interface options for supporting richer motion blocks and communication while staying within the compact Cs footprint. It aligns with IndraWorks engineering workflows for commissioning and diagnostics.

Does HCS01.1E-W0018-A-02-A-CC-EC-EM-NN-NN-FW include safety I/O (e.g., STO) by default?

This specific configuration lists “safety interface: not equipped,” so external safety (or variants with onboard safety) must be considered in the risk assessment. It is important to coordinate STO wiring and category/PL at the machine level.

Common Misspellings

Internal Product Review

The Bosch Rexroth Indramat’s controller HCS01.1E-W0018-A-02-A-CC-EC-EM-NN-NN-FW integrates an ADVANCED control section with SERCOS III master and internal blower cooling. It runs on 3×AC 110–230 V ±10% with 18 A peak current deliverance. This unit possess IP20 protective rating and includes support for Hiperface/EnDat encoder to serve in applications such as packaging, printing, handling and machine-tool cells.