HCS01.1E-W0018-A-02-B-ET-EC-EC-L4-NN-FW
HCS IndraDrive Controllers
The Bosch Rexroth Indramat HCS01.1E-W0018-A-02-B-ET-EC-EC-L4-NN-FW is an HCS Drive Controller in the HCS IndraDrive Controllers series, featuring MultiEthernet, 3 x AC 110...230 V ±10% input with 18 A peak current, internal blower air cooling, and STO, SBC safety interfaces with IP20 protection.
Technical Specifications
Communication Interface
MultiEthernet
Pairing Note
Paired with Control Section Design 'BASIC' (B)
Control Section Design Type
BASIC
Cooling Method
Air, internal (through integrated blower)
IP Rating
IP20
Design Version
1
Other Design Features
None
Interface 1 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2
Interface 2 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2
Safety Interface
STO (Safe Torque Off) and SBC (Safe Brake Control)
Line Series
HCS01
Mains Voltage
3 x AC 110...230 V ±10%
Device Peak Current
18 A
Power Supply Unit
Infeeding / Feeded
Product Type
HCS Drive Controller
Frequently Asked Questions
How does the internal air cooling system enhance the controller’s reliability during operation?
The integrated blower maintains continuous airflow through the unit’s housing to stabilize thermal levels below 50 degrees Celsius. The consistent cooling supports longer operational life and reduces overheating risks during full load operation.
How does the Safe Torque Off and Safe Brake Control improve safety in machine systems?
The STO and SBC features immediately disable motor torque and engage controlled braking when triggered. The response time remains below 10 milliseconds which ensures reliable motion shutdown during maintenance or emergencies.
What is the importance of pairing this controller with the BASIC control section design type?
The BASIC configuration aligns firmware and hardware architecture for consistent operational logic and communication. The design supports up to 2 encoder interfaces and simplifies system setup during installation.
How does MultiEthernet communication benefit automation networks?
The MultiEthernet interface supports data rates up to 100 megabits per second across multiple industrial protocols. The high-speed connectivity allows synchronized control between drives PLCs and HMIs in real time.
How does a peak current of 18 amperes impact performance in dynamic load applications?
The 18 A peak current supports rapid acceleration cycles in servo motors up to 1.5 kilowatts. The overload capability allows short bursts of high torque without exceeding the unit’s thermal limits.
Common Misspellings
HCS011EW0018A02BETECECL4NNFW
HCS01 1E W0018 A 02 B ET EC EC L4 NN FW
hcs01.1e-w0013-a-02-b-et-ec-em-sb-nn-fw
HCS1.1E-W0018-A-02-B-ET-EC-EC-L4-NN-FW
Internal Product Review
The HCS01.1E-W0018-A-02-B-ET-EC-EC-L4-NN-FW from Bosch Rexroth Indramat is a drive controller equipped with MultiEthernet communication and enhanced safety features such as STO and SBC. This device is ideal for industrial applications which ensures secure and efficient operation in automated production lines providing optimal control and energy management.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the HCS01.1E-W0018-A-02-B-ET-EC-EC-L4-NN-FW.
Want to 
