HCS01.1E-W0018-A-02-B-ET-EC-EP-S4-NN-AW
HCS IndraDrive Controllers
The HCS01.1E-W0018-A-02-B-ET-EC-EP-S4-NN-AW is an HCS Drive Controller from Bosch Rexroth Indramat’s HCS IndraDrive Controllers Series. Operating on 3 x AC 110...230 V ±10% with a peak current of 18 A, it features a MultiEthernet interface and supports Encoder IndraDyn Hiperface/EnDat 2.1/2.2. It includes internal blower air cooling, IP20 protection and a BASIC control section design.
Technical Specifications
Communication Interface
MultiEthernet
Pairing Note
Paired with Control Section Design 'BASIC' (B)
Control Section Design Type
BASIC
Cooling Method
Air, internal (through integrated blower)
IP Rating
IP20
Design Version
1
Other Design Features
None
Interface 1 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2
Line Series
HCS01
Mains Voltage
3 x AC 110...230 V ±10%
Device Peak Current
18 A
Power Supply Unit
Infeeding / Feeded
Product Type
HCS Drive Controller
Frequently Asked Questions
How does the internal air cooling method enhance operational reliability?
The internal air cooling system maintains optimal temperature by using an integrated blower. The design prevents overheating, ensuring the controller operates efficiently under load.
Why is the IP20 protection rating important for installation planning?
The IP20 rating means the device is protected from solid objects larger than 12mm. The system should be installed in a controlled indoor environment to avoid exposure to harmful elements.
How does a peak current rating of 18 A impact performance in motion control applications?
The 18 A peak current allows the controller to handle higher torque demands during transient conditions. This capability ensures stable and responsive motion control under dynamic loads.
Why is it beneficial to use a device with both infeeding and feeded power supply configurations?
The dual configuration offers flexible energy management and reduces wiring complexity. This setup allows for optimal power distribution and improves system reliability in multi-axis systems.
What factors should be considered when installing the drive controller in an automation panel?
Adequate airflow and proper grounding are necessary for heat dissipation and electrical safety. The controller should also be mounted in an enclosure that meets voltage and environmental requirements.
Common Misspellings
HCS011EW0018A02BETECEPS4NNAW
HCS01 1E W0018 A 02 B ET EC EP S4 NN AW
hcs01.1e-w0013-a-02-b-et-ec-nn-l4-aa-fw
HCS1.1E-W0018-A-02-B-ET-EC-EP-S4-NN-AW
Internal Product Review
The HCS01.1E-W0018-A-02-B-ET-EC-EP-S4-NN-AW by Bosch Rexroth is an advanced drive controller from the Indradrive controllers Series. It operates on AC 110-230V with a peak current of 18A and supports MultiEthernet and Encoder IndraDyn. Ideal for automation and robotics industries this controller ensures efficient control with internal cooling and IP20 protection.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the HCS01.1E-W0018-A-02-B-ET-EC-EP-S4-NN-AW.
Want to 
