HCS01.1E-W0018-A-02-B-ET-EC-PB-L4-NN-FW
HCS IndraDrive Controllers
Technical Specifications
Communication Interface
MultiEthernet
Pairing Note
Paired with Control Section Design 'BASIC' (B)
Control Section Design Type
BASIC
Cooling Method
Air, internal (through integrated blower)
IP Rating
IP20
Design Version
1
Other Design Features
None
Interface 1 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2
Interface 2 Type
PROFIBUS
Safety Interface
STO (Safe Torque Off) and SBC (Safe Brake Control)
Line Series
HCS01
Mains Voltage
3 x AC 110...230 V ±10%
Device Peak Current
18 A
Power Supply Unit
Infeeding / Feeded
Product Type
HCS Drive Controller
Frequently Asked Questions
What communication interfaces does the drive controller support?
The drive controller supports MultiEthernet communication with speeds up to 100 Mbps. It also supports PROFIBUS with a maximum transmission rate of 12 Mbps for reliable industrial networking.
How does the cooling method impact the performance of the drive controller?
The drive controller uses internal air cooling with an integrated blower. This cooling ensures the system remains within an optimal operating temperature range of 0°C to 40°C.
What is the significance of the IP20 rating for the drive controller?
The IP20 rating indicates that the drive controller is protected against solid objects larger than 12 mm. However, it is not protected against dust or water, making it suitable for indoor use in controlled environments.
What does the “BASIC” design type mean for the drive controller?
The BASIC design type provides a simplified configuration focusing on essential features. This ensures a cost-effective solution for applications that do not require advanced customizations.
How does the mains voltage specification affect the drive controller’s installation?
The drive controller operates with a mains voltage range of 3 x AC 110–230 V ±10%. This flexibility allows installation in regions with varying power supply specifications, reducing the need for additional voltage conversion.
Common Misspellings
HCS011EW0018A02BETECPBL4NNFW
HCS01 1E W0018 A 02 B ET EC PB L4 NN FW
hcs01.1e-w0013-a-02-b-et-ec-pb-l3-nn-fw
HCS1.1E-W0018-A-02-B-ET-EC-PB-L4-NN-FW
Internal Product Review
The Indramat HCS01.1E-W0018-A-02-B-ET-EC-PB-L4-NN-FW drive controller offers precise motion control with MultiEthernet and Hiperface/EnDat interfaces. It supports peak currents up to 18 A and operates on 3 phase AC 110 to 230 V. Ideal for robotics, packaging, and material handling industries, this controller also features safety controls like STO and SBC.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the HCS01.1E-W0018-A-02-B-ET-EC-PB-L4-NN-FW.
Want to 
