HCS01.1E-W0018-A-03-A-CC-EC-EM-L4-NN-FW
HCS IndraDrive Controllers
The Bosch Rexroth Indramat HCS01.1E-W0018-A-03-A-CC-EC-EM-L4-NN-FW from the HCS IndraDrive Controllers series delivers precision drive control in a compact package. As a Product Type HCS Drive Controller with a Control Section Design Type ADVANCED and Pairing Note Paired with Control Section Design 'ADVANCED' (A), this module operates seamlessly with higher-level automation systems. It accepts a broad input range of Mains Voltage 3 x AC 200...500 V ±10% and supports a Device Peak Current 18 A, ensuring dynamic performance for varied motor applications. The integrated Power Supply Unit Infeeding / Feeded architecture simplifies cabinet wiring and improves energy handling capacity.
Within the drive’s air-cooled enclosure, the Cooling Method Air, internal (through integrated blower) maintains optimal internal temperatures, while its IP Rating IP20 rating safeguards electronics in standard industrial environments. Dual encoder connectivity via Interface 1 Type Encoder IndraDyn Hiperface/EnDat 2.1/2.2 and Interface 2 Type Encoder emulation ensures accurate position feedback and simplifies retrofits. Functional safety is built in with Safety Interface STO (Safe Torque Off) and SBC (Safe Brake Control), allowing safe shutdown sequences and compliance with SIL 3 requirements. A robust Short circuit current rating 42000 A rms and a Rated power consumption control voltage input 34 W underline the controller’s resilience under fault conditions.
Measuring Device height 268 mm with a Minimum distance on the top of the device 90 mm for adequate airflow, the HCS01.1E module fits densely in modern control cabinets. It is available in Design Version 1 and requires that Firmware Order Note Firmware must be ordered as separate sub position, allowing tailored software updates without hardware changes. No additional options are needed, as Other Design Features None indicates a streamlined, ready-to-install configuration. Designed to operate continuously at an Ambient temperature with nominal data 40 degrees C, this drive controller brings reliability and flexibility to medium-power motion control tasks.
Technical Specifications
Pairing Note
Paired with Control Section Design 'ADVANCED' (A)
Control Section Design Type
ADVANCED
Cooling Method
Air, internal (through integrated blower)
IP Rating
IP20
Design Version
1
Firmware Order Note
Firmware must be ordered as separate sub position
Other Design Features
None
Interface 1 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2
Interface 2 Type
Encoder emulation
Safety Interface
STO (Safe Torque Off) and SBC (Safe Brake Control)
Line Series
HCS01
Mains Voltage
3 x AC 200...500 V ±10%
Device Peak Current
18 A
Power Supply Unit
Infeeding / Feeded
Product Type
HCS Drive Controller
Rated power consumption control voltage input
34 W
Short circuit current rating
42000 A rms
Minimum distance on the top of the device
90 mm
Device height
268 mm
Ambient temperature with nominal data
40 degrees C
Common Misspellings
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the HCS01.1E-W0018-A-03-A-CC-EC-EM-L4-NN-FW.
Want to 
