HCS01.1E-W0018-A-03-A-CC-EC-EM-NN-NN-FW
HCS IndraDrive Controllers
The HCS01.1E-W0018-A-03-A-CC-EC-EM-NN-NN-FW is an HCS Drive Controller by Bosch Rexroth Indramat from the HCS IndraDrive Controllers. It features a SERCOS III master (cross communication) interface and an ADVANCED control section design. The unit uses internal air cooling with an integrated blower, meets IP20, and accepts 3×AC 200…500 V ±10% mains. Delivering a peak current of 18 A and drawing 34 W control power, it weighs 2.10 kg and requires separate firmware ordering.
Technical Specifications
Communication Interface
SERCOS III master (cross communication)
Control Section Design Type
ADVANCED
Cooling Method
Air, internal (through integrated blower)
IP Rating
IP20
Design Version
1
Other Design Features
None
Interface 1 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2
Interface 2 Type
Encoder emulation
Safety Interface
Not equipped
Line Series
HCS01
Mains Voltage
3 x AC 200...500 V ±10%
Device Peak Current
18 A
Power Supply Unit
Infeeding / Feeded
Product Type
HCS Drive Controller
Short circuit current rating
42000 A rms
Mass
2.10 kg
Horizontal spacing on the device
0 mm
Rated power consumption control voltage input
34 W
Ambient temperature with nominal data
40 degrees C
Frequently Asked Questions
What planning is required when selecting firmware for a new application deployment?
The firmware is ordered separately and must match application requirements. This allows function-level customization without modifying the hardware.
How does the HCS01.1E-W0018-A-03-A-CC-EC-EM-NN-NN-FW maintain motion timing across axes in high-speed automation?
Its SERCOS III master interface supports cross-communication with cycle-precise timing. This enables deterministic synchronization in multi-axis systems.
How is heat effectively managed when the controller operates continuously at peak load?
The integrated blower ensures internal air movement across thermal zones. This allows the unit to sustain 18 A peak output without external cooling systems.
What should be considered when installing the HCS01.1E-W0018-A-03-A-CC-EC-EM-NN-NN-FW in industrial cabinets?
It features IP20 protection and compact 2.10 kg construction. Installation requires a clean, enclosed space with airflow clearance for reliable operation.
How does the control section impact servo accuracy in dynamic motion environments?
The ADVANCED control section reduces loop latency during rapid position shifts. This ensures accurate response under varying load and speed conditions.
Common Misspellings
HCS011EW0018A03ACCECEMNNNNFW
HCS01 1E W0018 A 03 A CC EC EM NN NN FW
hcs01.1e-w0018-a-02-a-cc-ec-et-l3-nn-fw
HCS1.1E-W0018-A-03-A-CC-EC-EM-NN-NN-FW
Internal Product Review
The HCS01.1E-W0018-A-03-A-CC-EC-EM-NN-NN-FW is a Bosch Rexroth drive controller equipped with an advanced control section. It supports SERCOS III communication, internal blower cooling, 18 A peak current, and operates on 3×AC 200–500 V ±10%. It's compact yet powerful with a weight of just 2.10 kg.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the HCS01.1E-W0018-A-03-A-CC-EC-EM-NN-NN-FW.
Want to 
