HCS01.1E-W0018-A-03-A-CC-EC-ET-L4-NN-FW
HCS IndraDrive Controllers
Technical Specifications
Pairing Note
Paired with Control Section Design 'ADVANCED' (A)
Control Section Design Type
ADVANCED
Cooling Method
Air, internal (through integrated blower)
IP Rating
IP20
Design Version
1
Other Design Features
None
Interface 1 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2
Interface 2 Type
MultiEthernet
Safety Interface
STO (Safe Torque Off) and SBC (Safe Brake Control)
Line Series
HCS01
Mains Voltage
3 x AC 200...500 V ±10%
Device Peak Current
18 A
Power Supply Unit
Infeeding / Feeded
Product Type
HCS Drive Controller
Minimum distance on the top of the device
90 mm
Rated control voltage input
24 ~ 20% V
Mass
2.10 kg
Short circuit current rating
42000 A rms
Device width
70 mm
Frequently Asked Questions
How does the HCS01.1E-W0018-A-03-A-CC-EC-ET-L4-NN-FW integrate into mixed-network topologies?
Its MultiEthernet interface supports various protocols for flexible communication. This enables seamless use across heterogeneous automation systems.
What safety behaviors are supported during emergency deceleration or axis shutdown?
Integrated STO and SBC functions enable safe torque and brake cutoff. This provides compliance with SIL-rated safety requirements in motion-critical environments.
How does the HCS01.1E-W0018-A-03-A-CC-EC-ET-L4-NN-FW maintain encoder precision under electrical interference?
It uses IndraDyn Hiperface for high-resolution position feedback. Shielded wiring and proper grounding are essential for stable encoder signal transmission.
How does the cooling strategy support thermal consistency during repeated high-current cycles?
An integrated internal blower regulates airflow over active components. This supports sustained 18 A peak output without external cooling equipment.
What environmental protections must be ensured during control cabinet installation?
The IP20 enclosure restricts usage to sealed, clean environments. It cannot tolerate airborne debris or moisture without additional external protection.
Common Misspellings
HCS011EW0018A03ACCECETL4NNFW
HCS01 1E W0018 A 03 A CC EC ET L4 NN FW
hcs01.1e-w0018-a-02-a-cc-ec-et-nn-nn-fw
HCS1.1E-W0018-A-03-A-CC-EC-ET-L4-NN-FW
Internal Product Review
The HCS01.1E-W0018-A-03-A-CC-EC-ET-L4-NN-FW drive controller from Bosch Rexroth is designed to handle 3 x AC 200–500 V ±10% input. It delivers 18 A peak current, includes MultiEthernet and IndraDyn Hiperface support, and features IP20 protection with internal blower cooling. The STO and SBC functions enhance operational safety.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the HCS01.1E-W0018-A-03-A-CC-EC-ET-L4-NN-FW.
Want to 
