HCS01.1E-W0018-A-03-A-CC-EC-ET-SB-NN-FW
HCS IndraDrive Controllers
The HCS01.1E-W0018-A-03-A-CC-EC-ET-SB-NN-FW from Bosch Rexroth Indramat is a HCS Drive Controller rated IP20 with Design Version 1. Part of the HCS IndraDrive Controllers series, it accepts a mains voltage of 3 x AC 200...500 V ±10% and delivers a peak current of 18 A. The controller uses internal air cooling through an integrated blower and supports IndraDyn Hiperface/EnDat 2.1/2.2 plus MultiEthernet interfaces.
It is paired with an ADVANCED control section design and operates at up to 95% relative humidity. With a depth of 196 mm and minimum top/bottom clearance of 90 mm, installation spacing is optimized. The storage temperature range spans -20 °C to 55 °C and firmware must be ordered separately.
Technical Specifications
Pairing Note
Paired with Control Section Design 'ADVANCED' (A)
Control Section Design Type
ADVANCED
Cooling Method
Air, internal (through integrated blower)
IP Rating
IP20
Design Version
1
Other Design Features
None
Interface 1 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2
Interface 2 Type
MultiEthernet
Line Series
HCS01
Mains Voltage
3 x AC 200...500 V ±10%
Device Peak Current
18 A
Power Supply Unit
Infeeding / Feeded
Product Type
HCS Drive Controller
Maximum Relative Humidity During Operation
95%
Storage Temperature
-20 degrees C to 55 degrees C
Horizontal Spacing
10 mm
Minimum Clearance Distance at Top and Bottom
90 mm
Depth
196 mm
Frequently Asked Questions
What installation clearances are required to maintain airflow efficiency in tight cabinets?
It requires a minimum of 90 mm top and bottom clearance for proper ventilation. This ensures the internal blower can maintain safe operating temperatures.
What environmental storage factors must be managed before deployment of the HCS01.1E-W0018-A-03-A-CC-EC-ET-SB-NN-FW?
It can be stored between -20 °C and 55 °C prior to commissioning. Avoiding extreme humidity and shock during storage preserves internal electronics.
How does the controller maintain consistent thermal behavior in humid production zones?
It operates at up to 95% relative humidity with sealed internal airflow. The blower ensures thermal protection without external air exchange.
How does the firmware structure support functional customization across automation tasks?
The firmware is ordered as a separate sub-position to match system-level demands. This allows flexible upgrades without altering the base hardware.
How does the HCS01.1E-W0018-A-03-A-CC-EC-ET-SB-NN-FW enable precise multi-axis communication in fast cycle applications?
Its MultiEthernet and encoder interfaces support real-time feedback and synchronized updates. This ensures accurate control in distributed motion networks.
Common Misspellings
HCS011EW0018A03ACCECETSBNNFW
HCS01 1E W0018 A 03 A CC EC ET SB NN FW
hcs01.1e-w0018-a-02-a-cc-ec-nn-nn-nn-fw
HCS1.1E-W0018-A-03-A-CC-EC-ET-SB-NN-FW
Internal Product Review
The model HCS01.1E-W0018-A-03-A-CC-EC-ET-SB-NN-FW is a Bosch Rexroth drive controller featuring a 3 x AC 200–500 V ±10% input range. It delivers 18 A peak current, supports MultiEthernet and Hiperface/EnDat encoders, and includes internal blower cooling. Its compact 196 mm depth enables efficient cabinet integration.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the HCS01.1E-W0018-A-03-A-CC-EC-ET-SB-NN-FW.
Want to 
