HCS01.1E-W0018-A-03-A-CC-EC-PB-S4-NN-FW
HCS IndraDrive Controllers
The HCS01.1E-W0018-A-03-A-CC-EC-PB-S4-NN-FW is a HCS Drive Controller from Bosch Rexroth Indramat’s HCS IndraDrive Controllers series. It features a SERCOS III master communication interface and an ADVANCED control section design. Cooled via an internal blower for air cooling, it supports 3 x AC 200…500 V ±10% mains and delivers a peak current of 18 A. Equipped with Encoder IndraDyn Hiperface/EnDat 2.1/2.2 and PROFIBUS interfaces and an IP20 rating, it requires firmware ordering as a separate sub position.
Technical Specifications
Communication Interface
SERCOS III master (cross communication)
Pairing Note
Paired with Control Section Design 'ADVANCED' (A)
Control Section Design Type
ADVANCED
Cooling Method
Air, internal (through integrated blower)
IP Rating
IP20
Design Version
1
Other Design Features
None
Interface 1 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2
Interface 2 Type
PROFIBUS
Line Series
HCS01
Mains Voltage
3 x AC 200...500 V ±10%
Device Peak Current
18 A
Power Supply Unit
Infeeding / Feeded
Product Type
HCS Drive Controller
Frequently Asked Questions
What feedback configurations are supported for encoder-driven applications using HCS01.1E-W0018-A-03-A-CC-EC-PB-S4-NN-FW?
This unit supports IndraDyn, Hiperface, and EnDat 2.1/2.2 encoder protocols. It enables precision feedback alignment for mixed encoder types in synchronous and asynchronous motor control environments.
Can this controller be deployed in lightly sealed panels with ambient air exposure?
With an IP20 protection rating, it resists accidental contact but lacks dust or liquid shielding. Installers must house it in fully enclosed, filtered control cabinets for industrial use.
How does HCS01.1E-W0018-A-03-A-CC-EC-PB-S4-NN-FW handle heat dissipation during sustained peak current cycles?
The internal blower cooling system actively circulates air to manage internal heat. It prevents thermal overload during high-duty operation in space-constrained enclosures.
How does the firmware requirement impact commissioning of this controller?
The ADVANCED control section requires firmware to be ordered separately. This allows system-specific function scaling but must be correctly matched to avoid startup issues.
Is simultaneous integration with Ethernet and legacy fieldbus topologies supported?
Yes, the controller includes both SERCOS III and PROFIBUS interfaces. This dual-interface setup supports hybrid network environments where modern and legacy systems coexist.
Common Misspellings
HCS011EW0018A03ACCECPBS4NNFW
HCS01 1E W0018 A 03 A CC EC PB S4 NN FW
hcs01.1e-w0018-a-02-a-et-ec-nn-nn-nn-fw
HCS1.1E-W0018-A-03-A-CC-EC-PB-S4-NN-FW
Internal Product Review
The HCS01.1E-W0018-A-03-A-CC-EC-PB-S4-NN-FW is a Bosch Rexroth drive controller with a peak current capacity of 18 A. It offers SERCOS III communication, PROFIBUS connectivity, IP20 protection, and an ADVANCED control section. The controller's integrated blower system ensures consistent internal air cooling for dependable performance.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the HCS01.1E-W0018-A-03-A-CC-EC-PB-S4-NN-FW.
Want to 
