HCS01.1E-W0018-A-03-B-ET-EC-EC-NN-AA-FW
HCS IndraDrive Controllers
Technical Specifications
Communication Interface
MultiEthernet
Pairing Note
Paired with Control Section Design 'BASIC' (B)
Control Section Design Type
BASIC
Cooling Method
Air, internal (through integrated blower)
IP Rating
IP20
Design Version
1
Interface 1 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2
Interface 2 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2
Safety Interface
Not equipped
Line Series
HCS01
Mains Voltage
3 x AC 200...500 V ±10%
Device Peak Current
18 A
Power Supply Unit
Infeeding / Feeded
Product Type
HCS Drive Controller
Frequently Asked Questions
What are the environmental limits for HCS01.1E-W0018-A-03-B-ET-EC-EC-NN-AA-FW?
This controller is rated for ambient temperatures up to 40°C under nominal conditions. Operating within this limit ensures thermal stability and prevents derating during extended use.
How does humidity influence controller performance and reliability?
Relative humidity should remain below 90% non-condensing to maintain insulation integrity. Exceeding this can cause corrosion, signal drift, or premature electronic degradation.
Why is a pollution degree 2 classification specified?
Pollution degree 2 indicates limited conductive contamination inside enclosures. This classification ensures dependable performance when installed in clean, industrial environments with controlled air quality.
What mounting environment optimizes heat dissipation efficiency?
The drive should be mounted vertically in a sealed cabinet with adequate airflow. This design enhances cooling performance and prolongs component service life.
How do vibration and altitude affect operational integrity?
The continuous exposure to vibration above rated levels may stress solder joints and connectors. Altitude above 1000 meters can reduce air density and cooling efficiency.
Common Misspellings
HCS011EW0018A03BETECECNNAAFW
HCS01 1E W0018 A 03 B ET EC EC NN AA FW
hcs01.1e-w0018-a-02-b-et-ec-pb-l3-nn-fw
HCS1.1E-W0018-A-03-B-ET-EC-EC-NN-AA-FW
Internal Product Review
The HCS01.1E‑W0018‑A‑03‑B‑ET‑EC‑EC‑NN‑AA‑FW by Bosch Rexroth is a drive controller used in industrial automation systems. It supports MultiEthernet and two encoder interfaces. The unit includes STO and SBC safety features and handles 200–500 V AC input. It is suitable for robotics, CNC machines, and packaging equipment.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the HCS01.1E-W0018-A-03-B-ET-EC-EC-NN-AA-FW.
Want to 
