HCS01.1E-W0018-A-03-B-ET-EC-EM-L3-NN-FW
HCS IndraDrive Controllers
The Bosch Rexroth Indramat HCS01.1E-W0018-A-03-B-ET-EC-EM-L3-NN-FW from the HCS IndraDrive Controllers series is a compact drive controller offering a MultiEthernet communication interface and is paired with Control Section Design BASIC. It supports encoder connections via IndraDyn Hiperface/EnDat 2.1/2.2 and encoder emulation, features an internal air cooling method through an integrated blower, and meets IP20 protection. The device operates on 3 x AC 200...500 V ±10% mains voltage, delivers a peak current of 18 A, integrates STO (Safe Torque Off) safety interface, and employs a feeded power supply unit. It is Design Version 1 with no additional design features, and firmware must be ordered separately.
Technical Specifications
Communication Interface
MultiEthernet
Pairing Note
Paired with Control Section Design 'BASIC' (B)
Control Section Design Type
BASIC
Cooling Method
Air, internal (through integrated blower)
IP Rating
IP20
Design Version
1
Other Design Features
None
Interface 1 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2
Interface 2 Type
Encoder emulation
Safety Interface
STO (Safe Torque Off)
Line Series
HCS01
Mains Voltage
3 x AC 200...500 V ±10%
Device Peak Current
18 A
Power Supply Unit
Infeeding / Feeded
Product Type
HCS Drive Controller
Frequently Asked Questions
How does humidity affect this controller’s operational safety?
The unit functions reliably below 90% non-condensing relative humidity. Maintaining this range prevents corrosion and ensures stable insulation resistance during long-term industrial operation.
What are the ambient limits for HCS01.1E-W0018-A-03-B-ET-EC-EM-L3-NN-FW?
It is designed for continuous operation up to 40°C ambient temperature. Staying within this limit protects internal components and preserves consistent torque output efficiency.
How does altitude influence electrical insulation capability?
At elevations above 1000 meters, thinner air reduces cooling efficiency and dielectric strength. Derating may be necessary to maintain safe thermal and voltage margins.
Why is vibration control important in installation environments?
Vibration isolation prevents micro-fractures in solder joints and connector fatigue. Using shock-damped mounting structures enhances long-term mechanical reliability and reduces maintenance frequency.
How does cabinet design support environmental protection standards?
Enclosing the controller in a sealed cabinet ensures compliance with Pollution Degree 2 conditions. This configuration limits conductive dust exposure and safeguards internal electronics.
Common Misspellings
HCS011EW0018A03BETECEML3NNFW
HCS01 1E W0018 A 03 B ET EC EM L3 NN FW
hcs01.1e-w0018-a-02-e-s3-ec-ep-nn-nn-fw
HCS1.1E-W0018-A-03-B-ET-EC-EM-L3-NN-FW
Internal Product Review
The Bosch Rexroth HCS01.1E-W0018-A-03-B-ET-EC-EM-L3-NN-FW drive controller uses MultiEthernet communication and supports IndraDyn Hiperface or EnDat encoders. It operates on 3× AC 200–500 V with an 18 A peak current and STO safety interface. The device is suitable for robotics, packaging, and material handling automation systems.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the HCS01.1E-W0018-A-03-B-ET-EC-EM-L3-NN-FW.
Want to 
