HCS01.1E-W0018-A-03-B-ET-EC-PB-L3-NN-FW
HCS IndraDrive Controllers
HCS01.1E-W0018-A-03-B-ET-EC-PB-L3-NN-FW, Bosch Rexroth Indramat, HCS IndraDrive Controllers product is a high-performance HCS Drive Controller within the HCS Compact Converter Series. Designed as part of the HCS01 line, this unit features a Control Section Design Type of BASIC, delivering streamlined motion control for compact machine architectures. It ships paired with Control Section Design ‘BASIC’ (Pairing Note) for plug-and-play readiness and supports modular expansion without altering cabinet layouts. As a fully integrated solution, it aligns with industry demands for scalable automation and simplified commissioning.
Engineered for robust operation, it accepts a Mains Voltage of 3 x AC 200...500 V ±10% and sustains a Device Peak Current of 18 A for dynamic load profiles. Communications are handled via a MultiEthernet bus, while dual interfaces include Encoder IndraDyn Hiperface/EnDat 2.1/2.2 and PROFIBUS to link drives and feedback devices. Internal air management is ensured by a Air, internal (through integrated blower) cooling method, and functional safety is built around STO (Safe Torque Off) in an IP20 enclosure. The controller’s passive, conformal-coated boards expand mean time between failures under factory dust and temperature variations.
Integration into systems is seamless: the Power Supply Unit supports both infeeding and feedback modes, reducing cabinet wiring complexity. Firmware is field-upgradable—note that Firmware must be ordered as separate sub position—and the electronics adhere to Design Version 1, ensuring consistency across deployments. With no extraneous design features, the unit’s compact footprint and standardized interfaces make it ideally suited for high-density machine tools, packaging lines, and general-purpose automation requiring reliable, safety-rated motion control.
Technical Specifications
Communication Interface
MultiEthernet
Pairing Note
Paired with Control Section Design 'BASIC' (B)
Control Section Design Type
BASIC
Cooling Method
Air, internal (through integrated blower)
IP Rating
IP20
Design Version
1
Other Design Features
None
Interface 1 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2
Interface 2 Type
PROFIBUS
Safety Interface
STO (Safe Torque Off)
Line Series
HCS01
Mains Voltage
3 x AC 200...500 V ±10%
Device Peak Current
18 A
Power Supply Unit
Infeeding / Feeded
Product Type
HCS Drive Controller
Frequently Asked Questions
What load types suit low-current rated operation best?
The controller supports constant torque and variable torque loads with stable 7.6 A output for servo and VFD motor applications. The low output current reduces heat generation, favoring thermally constrained environments.
How does the control react under line fluctuation?
The drive handles ±10% input voltage fluctuation across 3×AC 200–500 V, maintaining output regulation without fault. The broad range reduces the need for input voltage conditioning hardware.
What is the behavior during high-speed frequency output?
The unit outputs up to 1600 Hz for dynamic high-speed motor operation in specialized tasks. The performance depends on motor compatibility and careful EMI management in system design.
How does HCS01.1E-W0018-A-03-B-ET-EC-PB-L3-NN-FW integrate with fieldbus?
The embedded PROFIBUS interface (PB) enables direct fieldbus control with deterministic timing across automation layers. The L3 hardware option ensures compatibility with existing decentralized IO architectures.
What supporting devices ensure optimal system stability?
The controller should be paired with appropriate fuses, grounding conductors, and Rexroth motors with encoder feedback. The correct integration improves lifecycle reliability and minimizes commissioning issues.
Common Misspellings
HCS011EW0018A03BETECPBL3NNFW
HCS01 1E W0018 A 03 B ET EC PB L3 NN FW
hcs01.1e-w0018-a-03-a-cc-ec-pb-l3-nn-fw
HCS1.1E-W0018-A-03-B-ET-EC-PB-L3-NN-FW
Internal Product Review
The Bosch Rexroth HCS01.1E-W0018-A-03-B-ET-EC-PB-L3-NN-FW drive controller supports MultiEthernet communication and includes a basic control section. It handles 3× 200–500 V AC power with air cooling and an STO safety interface. It is well suited to machine tools, robotics, and precision packaging operations.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the HCS01.1E-W0018-A-03-B-ET-EC-PB-L3-NN-FW.
Want to 
