HCS01.1E-W0018-A-03-B-ET-EC-PB-L4-NN-AW
HCS IndraDrive Controllers
The HCS01.1E-W0018-A-03-B-ET-EC-PB-L4-NN-AW is a HCS Drive Controller manufactured by Bosch Rexroth Indramat and part of the HCS IndraDrive Controllers series. It offers MultiEthernet and PROFIBUS communication, supports encoder IndraDyn Hiperface/EnDat 2.1/2.2, and features a BASIC control section. With integrated blower cooling, it operates on 3 x AC 200...500 V ±10% and peaks at 18 A. Safety functions include STO and SBC, and it carries an IP20 rating.
Technical Specifications
Communication Interface
MultiEthernet
Pairing Note
Paired with Control Section Design 'BASIC' (B)
Control Section Design Type
BASIC
Cooling Method
Air, internal (through integrated blower)
IP Rating
IP20
Design Version
1
Other Design Features
None
Interface 1 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2
Interface 2 Type
PROFIBUS
Safety Interface
STO (Safe Torque Off) and SBC (Safe Brake Control)
Line Series
HCS01
Mains Voltage
3 x AC 200...500 V ±10%
Device Peak Current
18 A
Power Supply Unit
Infeeding / Feeded
Product Type
HCS Drive Controller
Frequently Asked Questions
What is the compact construction form in this series?
The HCS01 series uses a narrow-width design for dense control cabinet integration and vertical stacking. The form factor supports simplified routing and side-by-side mounting.
How does HCS01.1E-W0018-A-03-B-ET-EC-PB-L4-NN-AW shape impact layout?
The tall and slim housing of this model eases placement in constrained panels while maintaining front-accessibility. The rear-depth allows clear separation for power and control wiring.
What motor housing shape is common with compatible motors?
Motors typically have cylindrical bodies with square flange mounts for standardized installation. The uniform housing geometry ensures predictable shaft alignment and minimizes misfit during assembly.
How does form factor assist with airflow and cooling?
The vertical orientation promotes natural convection across the heatsinks, enhancing passive cooling. The airflow channels remain unobstructed due to standardized height and bottom clearance requirements.
What shape factors influence enclosure compatibility concerns?
The device’s rectangular footprint and minimal width allow tighter cabinet groupings without ventilation conflicts. The defined height ensures consistent front-panel alignment with adjacent components.
Common Misspellings
HCS011EW0018A03BETECPBL4NNAW
HCS01 1E W0018 A 03 B ET EC PB L4 NN AW
hcs01.1e-w0018-a-03-a-cc-ec-pb-l4-nn-fw
HCS1.1E-W0018-A-03-B-ET-EC-PB-L4-NN-AW
Internal Product Review
The HCS01.1E-W0018-A-03-B-ET-EC-PB-L4-NN-AW by Bosch Rexroth is a servo drive controller in the HCS01 family. It offers MultiEthernet communication with additional PROFIBUS (PB) interface, internal air cooling, and runs on 3 × AC 200‑500 V with 18 A peak current. Its level‑4 safety (L4) features suit use in factory automation, process lines, and robotics systems.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the HCS01.1E-W0018-A-03-B-ET-EC-PB-L4-NN-AW.
Want to 
