HCS01.1E-W0018-A-03-B-ET-EC-PB-S5-NN-FW
HCS IndraDrive Controllers
Technical Specifications
Communication Interface
MultiEthernet
Pairing Note
Paired with Control Section Design 'BASIC' (B)
Control Section Design Type
BASIC
Cooling Method
Air, internal (through integrated blower)
IP Rating
IP20
Design Version
1
Other Design Features
None
Interface 1 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2
Interface 2 Type
PROFIBUS
Line Series
HCS01
Mains Voltage
3 x AC 200...500 V ±10%
Device Peak Current
18 A
Power Supply Unit
Infeeding / Feeded
Product Type
HCS Drive Controller
Frequently Asked Questions
What is the continuous power dissipation at full current?
The drive dissipates 80 W under continuous full-load operation, accounting for internal losses. The specification helps design proper thermal management in cabinets.
What is the rated output current capability?
The nominal motor output current is 7.6 A, matching medium-power servo loads. The rating ensures a balance between compact form and useful drive torque.
What input voltage range is acceptable for this unit?
The drive accepts 3 × AC 200–500 V with ±10% tolerance to handle supply variation. The wide range supports global deployment without extra power conversion.
What output frequency span does the controller support?
The supported output frequency is 0 to 1600 Hz, enabling both low-speed and high-speed motor control. The wide span allows flexible application in varied motion profiles.
Which control voltage does this drive require?
The control section requires 24 V (±20%) for its electronics and interface circuits. The specification protects against undervoltage and ensures stable internal logic operation.
Common Misspellings
HCS011EW0018A03BETECPBS5NNFW
HCS01 1E W0018 A 03 B ET EC PB S5 NN FW
hcs01.1e-w0018-a-03-a-et-ec-ec-l3-nn-fw
HCS1.1E-W0018-A-03-B-ET-EC-PB-S5-NN-FW
Internal Product Review
The HCS01.1E-W0018-A-03-B-ET-EC‑PB‑S5‑NN‑FW by Bosch Rexroth supports MultiEthernet plus PROFIBUS (PB) communication, includes internal air cooling, and is rated IP20. It incorporates the S5 Safe Motion function and is design version 1 with firmware ordered separately. It suits automation, packaging, and material handling systems.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the HCS01.1E-W0018-A-03-B-ET-EC-PB-S5-NN-FW.
Want to 
