R911328448 (HCS01.1E-W0003-A-02-B-ET-EC-PB-NN-NN-FW)

Name: R911328448 (HCS01.1E-W0003-A-02-B-ET-EC-PB-NN-NN-FW)
Brand: Indramat Drives
SKU: HCS01.1E-W0003-A-02-B-ET-EC-PB-NN-NN-FW
Price: 560.00 USD
Availability: InStock

HCS IndraDrive Controllers

In-Stock, Ships 3-5 Days

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone

Part Number

+Add a message

Message

Request a Replacement

Request a Repair

Quote Both

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone:
1-888-551-3082

Email:
sales@indramat-usa.com

The Bosch Rexroth drive controller R911328448 (HCS01.1E-W0003-A-02-B-ET-EC-PB-NN-NN-FW) is a HCS01 series device equipped with an internal air cooling system and features an IP20 protection class. It provides MultiEthernet communication, supporting standard encoders through an IndraDyn Hiperface/EnDat 2.1/2.2 interface, and includes a PROFIBUS connection rated at +5V ±10%. The controller operates on 3-phase AC mains voltage from 110 to 230 V ±10% with a device peak current of 3 A. Control functionality is provided via the BASIC control section design (Type B). The device offers a 24-bit analog output with overload protection, a digital I/O connection on the X37 spring terminal, and facilitates motor holding brake current measurement and monitoring. Safety technology is not integrated, and appropriate precautions must be taken due to potential risks from high housing voltage or pressurized lines. Firmware must be ordered separately.

Technical Specifications

Safety Technology
None

Hazardous Substances
No

Voltage for Maintenance/Repair
Less than 50V

Control Panel Connection Required
Yes

Analog Output Resolution
24 bits

Overload Protection
Yes

Interface
PROFIBUS

Signal Voltage Rating
+5V +/-10%

Ethernet Module Included
Yes

Supports Standard Encoders
Yes

Incorporates Signal Scalable Processing
Yes

Encoder-related Data Buffering
Yes

Digital Inputs Type
High-side switches

Brake Current Monitoring
Yes

Engineering Port Availability
Yes

Operation Modes
Single-phase and Three-phase

Firmware Types Supported
Five

Installation Restrictions
Not allowed in a faulty state

Operation Restrictions
Only with intended firmware

Connecter Handling
Not to disconnect or connect when power is ON

Housing Voltage and Leakage Current
High with unintended use

Shipping Method
Freight carriers.

Frequently Asked Questions

What is the operating voltage range of Bosch Rexroth Indramat controller HCS01.1E-W0003-A-02-B-ET-EC-PB-NN-NN-FW in servo applications?

It supports a three-phase AC supply between 110–230V ±10%, ensuring stable power distribution in variable-speed servo drive environments under controlled feedback conditions.

How does the controller HCS01.1E-W0003-A-02-B-ET-EC-PB-NN-NN-FW achieve current regulation at peak load?

It provides a device peak current of 3A, leveraging fast PWM control algorithms to sustain torque integrity under transient and dynamic load variations.

Where can diagnostic data be accessed in the HCS01.1E-W0003-A-02-B-ET-EC-PB-NN-NN-FW controller?

Diagnostic information is available through the control interface, using Bosch Rexroth IndraWorks or serial configuration tools for fault tracing and parameter tuning.

Does the HCS01.1E-W0003-A-02-B-ET-EC-PB-NN-NN-FW support regenerative feedback operation?

No, this variant functions as a feeded/infeeding unit, lacking integrated regeneration circuitry for energy feedback to the supply network.

What are the startup configuration parameters for Bosch Rexroth Indramat controller HCS01.1E-W0003-A-02-B-ET-EC-PB-NN-NN-FW?

Initial configuration includes setting encoder type, PROFIBUS node address, and motor data via IndraWorks for synchronized commissioning.

Common Misspellings

HCS011EW0003A02BETECPBNNNNFW

HCS01 1E W0003 A 02 B ET EC PB NN NN FW

hcs04.2e-w0590-n-06-nnnn

HCS1.1E-W0003-A-02-B-ET-EC-PB-NN-NN-FW

Internal Product Review

The controller HCS01.1E-W0003-A-02-B-ET-EC-PB-NN-NN-FW from the HCS series of Bosch Rexroth Indramat is a drive controller designed for precise automation. It uses integrated blower cooling and PROFIBUS communication. It is widely applied in solar trackers and light-duty servo applications in industrial automation systems.