R911328453 (HCS01.1E-W0006-A-02-B-ET-EC-EC-NN-NN-FW)

HCS IndraDrive Controllers

HCS01.1E-W0006-A-02-B-ET-EC-EC-NN-NN-FW Series Image

In Stock, Shipping Varies

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone

Part Number

+Add a message

Message

Request a Replacement

Request a Repair

Quote Both

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone:
1-888-551-3082

Email:
[email protected]

The Bosch Rexroth drive controller MPN R911328453 (HCS01.1E-W0006-A-02-B-ET-EC-EC-NN-NN-FW) features a design code of 1 and is compatible with third-party motors meeting specific utilization requirements. It supports a PWM frequency of 4 kHz and is configured for a 40-meter motor cable. The controller must be mounted vertically for optimal cooling using its integrated internal blower and operates within a 0–40°C temperature range. It utilizes MultiEthernet communication, supports several Ethernet field bus systems, and is paired with a BASIC control section. The unit provides support for encoder feedback via IndraDyn Hiperface/EnDat 2.1/2.2 interfaces and requires plugged-on connectors for operation. The enclosure rating is IP20, and it is designed for direct mounting with 6 Nm screw tightening torque. The device requires a minimum 10 mm² copper wire grounding connection and is powered by a 3 x AC 110...230 V ±10% supply with a peak device current of 6 A. Electrical connections for power and motor temperature monitoring are included. Electrolytic capacitors form part of the unit, and hot-running braking resistors must be considered in adjacent equipment placement to avoid overheating.

Technical Specifications

Design Code
1

Use
With third-party motor complying with requirements

Motor Cable Length
40m at 4kHz PWM frequency

Operating Method
With plugged-on connectors

Braking Resistors
Become very hot during operation

Mounting Method
Rear mounting using 6Nm tightening torque screws

Safety Precautions
Adhesive labels on sides

Grounding Requirement
Copper wire of at least 10mm2 cross-section

Operating Temperature
0°C to 40°C

Terminal Connectors
Need strain relief inside control cabinet

Installation Orientation
Never horizontal

Ethernet Field Bus Systems
Supports integration

Access Timing
Accessible after half an hour of turning off

Packaging
Custom military-grade.

Frequently Asked Questions

Common Misspellings

Internal Product Review

Built for clean cabinet installs and straightforward commissioning, HCS01.1E-W0006-A-02-B-ET-EC-EC-NN-NN-FW is a top rated model. It simply focuses on rock-solid MultiEthernet networking. Dual encoder ports keep feedback precise, while BASIC pairing keeps setup simple for scalable motion cells.

1620 Old Apex Road
Cary, NC 27513, USA

Toll Free: 1-888-551-3082
International: 1-919-443-0207

Fax: 1-919-867-6204

[email protected]

Shipping & Payment Options

Warranty

Indramat USA 1 Year Warranty

Repair

We offer a repair service for the HCS01.1E-W0006-A-02-B-ET-EC-EC-NN-NN-FW.

Exchange

Want to sell your HCS01.1E-W0006-A-02-B-ET-EC-EC-NN-NN-FW?

Quick Links

Terms and Policies

North Carolina Office

Indramat USA
1620 Old Apex Road
Cary, NC 27513
USA

Phone

Toll Free: 1-888-551-3082
International: 1-919-443-0207

Indramat USA sells factory new and pre-owned surplus products and maintains channels to procure supply. Indramat USA is not affiliated with nor an authorized distributor or representative of any manufacturers, brands or products listed. Designated trademarks, brand names, and brands appearing herein are the property of their respective owners.