R911331025 (HCS01.1E-W0003-A-02-B-ET-EC-EC-NN-AA-FW)

Name: R911331025 (HCS01.1E-W0003-A-02-B-ET-EC-EC-NN-AA-FW)
Brand: Indramat Drives
SKU: HCS01.1E-W0003-A-02-B-ET-EC-EC-NN-AA-FW
Price: 258.00 USD

HCS IndraDrive Controllers

Call for Quote

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone

Part Number

+Add a message

Message

Request a Replacement

Request a Repair

Quote Both

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone:
1-888-551-3082

Email:
sales@indramat-usa.com

The R911331025 (HCS01.1E-W0003-A-02-B-ET-EC-EC-NN-AA-FW) is a Bosch Rexroth HCS01 series drive controller designed for integration in industrial automation systems such as machine tools, material handling, and printing machinery. This device features a 3 A peak output current and operates on three-phase AC mains voltages from 110 V to 230 V ±10%. It incorporates an internal air cooling system and provides ingress protection to IP20 standards. Multi-Ethernet communication interfaces support PROFINET IO, EtherNet/IP, EtherCAT, and sercos III protocols, while two encoder interfaces accommodate IndraDyn Hiperface and EnDat 2.1/2.2 encoders at 5 V or 12 V. The unit is classified under IEC 61800-3 category C3 for industrial environments and is intended to pair with a BASIC control section. Firmware must be ordered separately.

Technical Specifications

Product Family
IndraDrive Cs Platform

Maximum Current Rating
3A

Cooling Method
Internal Heat Dissipation

Ingress Protection
IP 20

Operational Voltage
110-230V (Three-Phase AC)

Supporting Universal Range
BASIC UNIVERSAL

Communication Interface
Multi-Ethernet

Supported Protocols
PROFINET IO, Sercos III, EtherCAT, EtherNet/IP

Multi-Encoder Interfaces
2

IEC 61800-3 category
C3

Control Panel
Standard

Firmware Support
Yes

Frequently Asked Questions

What configuration steps are required to parameterize the Bosch Rexroth HCS01.1E-W0003-A-02-B-ET-EC-EC-NN-AA-FW controller for closed-loop control?

The parameters for current, torque, and velocity loops must be set through IndraWorks software, ensuring encoder alignment and feedback offset calibration.

Does the Bosch Rexroth HCS01.1E-W0003-A-02-B-ET-EC-EC-NN-AA-FW controller support regenerative energy handling?

Yes, its feeded/infeeding supply allows controlled energy return to the DC bus, reducing external resistor dissipation and improving energy efficiency.

What startup calibration routines are used in the HCS01.1E-W0003-A-02-B-ET-EC-EC-NN-AA-FW controller?

It runs automatic offset tuning, encoder referencing, and motor identification routines to establish baseline torque and velocity constants.

How is electromagnetic compatibility achieved in Bosch Rexroth HCS01.1E-W0003-A-02-B-ET-EC-EC-NN-AA-FW controller systems?

The integrated EMC filters and shielded connection terminals minimize conducted emissions and ensure compliance with industrial electromagnetic immunity standards.

Does the HCS01.1E-W0003-A-02-B-ET-EC-EC-NN-AA-FW controller support multi-protocol communication?

Yes, depending on firmware variant, it can integrate with EtherCAT, SERCOS III, or PROFIBUS DP for flexible automation connectivity.

Common Misspellings

HCS011EW0003A02BETECECNNAAFW

HCS01 1E W0003 A 02 B ET EC EC NN AA FW

hcs03.1e-w0280-a-05-nnnv

HCS1.1E-W0003-A-02-B-ET-EC-EC-NN-AA-FW

Internal Product Review

The Bosch Rexroth Indramat HCS01.1E-W0003-A-02-B-ET-EC-EC-NN-AA-FW controller comes from the renowned HCS drive controller series. It consumes 3 A peak current with IndraDyn Hiperface/EnDat interface. It is widely applied in conveyors, crushing, mining applications and in compact industrial systems.