1-888-551-3082 | 1-919-443-0207 | [email protected]

R911331026 (HCS01.1E-W0003-A-02-B-ET-EC-NN-NN-AA-FW)

HCS IndraDrive Controllers

HCS01.1E-W0003-A-02-B-ET-EC-NN-NN-AA-FW Series Image

Call For Quote

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone

Part Number

+Add a message

Message

Request a Replacement

Request a Repair

Quote Both

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Current response time:

4 Minutes 2 Seconds

Phone:
1-888-551-3082

Email:
[email protected]

The drive controller with MPN R911331026 (HCS01.1E-W0003-A-02-B-ET-EC-NN-NN-AA-FW) is part of the HCS01 series and is engineered for applications such as wood machining. It incorporates multi-Ethernet communication with LED indicators, a programming module control panel, and integrated safety technology. Mounting options include back, left, and right sides, utilizing M6 x 20 screws. The unit supports holding brake control, continuous motor temperature monitoring, and connection via a 15-pin D-Sub female for the motor encoder. Electrolytic capacitors are present and require regular use to prevent degradation. Terminal blocks accept 0.5Nm to 0.6Nm tightening torque, with strain relief included. It offers IP20 ingress protection and is designed for 3 x AC 110–230 V ±10% mains voltage with a peak current of 3 A. The control section is design type 'BASIC' and pairing should match. The controller uses internal air cooling with a built-in blower and features direct grounding and special shield plates for cable management. The firmware must be ordered separately, and operation in public low-voltage supply areas or hardware modification is not supported.

Technical Specifications

Mounting options
Back-side, left-hand and right-hand

Mounting screws
M6 x 20

Relative humidity during transport
5% to 95%

Terminal Connector Strain Relief
Yes

Terminal block tightening torque
0.5Nm to 0.6Nm

Motor encoder Connector
D-Sub female 15-pin

Connection to equipment grounding conductor
Direct

Holding brake control for motor
Yes

Touch guard requirement
Mandatory

Cable shield connection
Special plates incorporated

Applications
Machine tools for wood machining

Control panel
With programming module functionality

Integrated safety technology
Yes

Maximum current rating
3.3A

Digital inputs/outputs
Freely configurable

Hardware modification
Not permitted

Common Misspellings

1620 Old Apex Road
Cary, NC 27513, USA

Toll Free: 1-888-551-3082
International: 1-919-443-0207

Fax: 1-919-867-6204

[email protected]

Shipping & Payment Options

Warranty

Indramat USA 1 Year Warranty

Repair

We offer a repair service for the HCS01.1E-W0003-A-02-B-ET-EC-NN-NN-AA-FW.

Exchange

Want to sell your HCS01.1E-W0003-A-02-B-ET-EC-NN-NN-AA-FW?

Indramat Is Trusted By

Quick Links

Terms and Policies

North Carolina Office

Indramat USA
1620 Old Apex Road
Cary, NC 27513
USA

Phone

Toll Free: 1-888-551-3082
International: 1-919-443-0207

Indramat USA sells factory new and pre-owned surplus products and maintains channels to procure supply. Indramat USA is not affiliated with nor an authorized distributor or representative of any manufacturers, brands or products listed. Designated trademarks, brand names, and brands appearing herein are the property of their respective owners.