1-888-551-3082 | 1-919-443-0207 | [email protected]

R911331031 (HCS01.1E-W0005-A-03-B-ET-EC-PB-NN-AA-FW)

HCS IndraDrive Controllers

HCS01.1E-W0005-A-03-B-ET-EC-PB-NN-AA-FW Series Image

Call For Quote

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone

Part Number

+Add a message

Message

Request a Replacement

Request a Repair

Quote Both

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Current response time:

3 Minutes 12 Seconds

Phone:
1-888-551-3082

Email:
[email protected]

The Bosch Rexroth R911331031 (HCS01.1E-W0005-A-03-B-ET-EC-PB-NN-AA-FW) is an HCS Drive Controller designed for integration in industrial control environments. It requires installation in a de-energized state, fixed grounding, and adequate cabinet spacing for airflow via its integrated blower (air cooling, internal). This unit supports MultiEthernet communication per IEEE 802.3 for X24 and X25 links and offers interfaces for IndraDyn Hiperface, EnDat 2.1/2.2 encoders, and PROFIBUS. The device is configured with a BASIC control section, has no safety interface, and features an IP20 enclosure rating. Power input is rated for 3 x AC 200–500 V ±10% with a 5 A peak current. The power supply output is 5–5.25 V, 500 mA. DC buses can be connected directly or indirectly, and D-Sub 15-pin connectors at X8 are used for encoder connections. Shielded analog input cables must be applied if their length exceeds 30 mm. Firmware is ordered separately.

Technical Specifications

DC Bus Connection
Yes

Ethernet Fieldbus System Integration
Yes

Connectivity Points
X24 and X25 (Compliant with IEEE 802.3)

Operation without DC Bus Connector
Prohibited

Grounding Requirement
Yes

Encoder and Controller Connection Point
X8

Safety Technology
None

Power Supply Output Voltage
5V to 5.25V

Power Supply Output Current
Up to 500mA

DC Bus Connection With Other Controllers
Direct and Indirect Via Connecting Bars

Depth
196mm

Digital I/O
Compliant with IEC 61131

Standard Digital Input Current
2mA to 5mA

Standard Digital Input Voltage
-3V to 30V

Digital Outputs Switches
High-Side

Power Supply Switch OFF via Firmware
Yes

Analog Voltage Input Cable
Shielded if length is more than 30mm

Shipping
International

Backup Support Duration
1 Year.

Common Misspellings

1620 Old Apex Road
Cary, NC 27513, USA

Toll Free: 1-888-551-3082
International: 1-919-443-0207

Fax: 1-919-867-6204

[email protected]

Shipping & Payment Options

Warranty

Indramat USA 1 Year Warranty

Repair

We offer a repair service for the HCS01.1E-W0005-A-03-B-ET-EC-PB-NN-AA-FW.

Exchange

Want to sell your HCS01.1E-W0005-A-03-B-ET-EC-PB-NN-AA-FW?

Indramat Is Trusted By

Quick Links

Terms and Policies

North Carolina Office

Indramat USA
1620 Old Apex Road
Cary, NC 27513
USA

Phone

Toll Free: 1-888-551-3082
International: 1-919-443-0207

Indramat USA sells factory new and pre-owned surplus products and maintains channels to procure supply. Indramat USA is not affiliated with nor an authorized distributor or representative of any manufacturers, brands or products listed. Designated trademarks, brand names, and brands appearing herein are the property of their respective owners.