R911331613 (HCS01.1E-W0003-A-02-B-ET-EC-EC-L4-NN-FW)

Where should the HCS01.1E-W0003-A-02-B-ET-EC-EC-L4-NN-FW controller be positioned within the control cabinet to ensure optimal heat management?

It must be vertically mounted with 90mm clearance above and below, ensuring uniform airflow and preventing internal heat accumulation during prolonged operational hours.

Does the Bosch Rexroth HCS01.1E-W0003-A-02-B-ET-EC-EC-L4-NN-FW controller allow DC bus coupling through the X77 interface point?

No, it lacks DC bus coupling capability via X77, necessitating independent supply circuits when integrated within parallel multi-controller configurations.

How is the relay contact in the HCS01.1E-W0003-A-02-B-ET-EC-EC-L4-NN-FW controller wired for system feedback integrity?

It is connected in a normally closed configuration, transmitting operational feedback to supervisory logic systems for fault monitoring and status diagnostics.

What preventive measures does Bosch Rexroth recommend for condensation avoidance on the controller surface?

It maintain ambient humidity below 85% and temperature gradients within 5°C/hour to prevent surface condensation, which could impair dielectric strength and insulation.

What is the function of the cooling delay after power-off in the HCS01.1E-W0003-A-02-B-ET-EC-EC-L4-NN-FW controller?

The 15-minute cooling delay ensures thermal equilibrium dissipation, preventing thermal shock and maintaining component longevity after shutdown sequences.

HCS011EW0003A02BETECECL4NNFW

HCS01 1E W0003 A 02 B ET EC EC L4 NN FW

hcs03.1e-w0280-a-05-nnnn

HCS1.1E-W0003-A-02-B-ET-EC-EC-L4-NN-FW

The HCS01.1E-W0003-A-02-B-ET-EC-EC-L4-NN-FW controller from Bosch Rexroth Indramat part of the HCS series. It has 8W continuous power dissipation and parallel connectivity options with fuse protection. It is used for driving asynchronous and synchronous rotary or linear controllers in industrial automation systems.