1-888-551-3082 | 1-919-443-0207 | [email protected]

R911331615 (HCS01.1E-W0003-A-02-B-ET-EC-PB-L4-NN-FW)

HCS IndraDrive Controllers

  Call For Quote
Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping
Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping
The Bosch Rexroth R911331615 (HCS01.1E-W0003-A-02-B-ET-EC-PB-L4-NN-FW) drive controller with Safe Torque OFF and SBC functionality is designed for direct mounting inside the control cabinet. It handles installation altitudes up to 4000m and has a maximum output current of 1.1A. The device offers four switching frequencies (4kHz, 8kHz, 12kHz, and 16kHz) and must be free from any combustible materials above it. Cooling is by natural convection, but forced cooling can be applied if necessary. The unit is supplied with mains voltage, with increased power requirements for optional interface connections. The controller is protected by a fuse against overheating if a short circuit occurs. When multiple controllers are connected in parallel, the highest power consumer should be placed near the power supply. This controller is environmentally-friendly, being asbestos- and hydrocarbon-free, and includes features like a touch guard and a microSD memory card.

Technical Specifications

Functionality
Safe Torque OFF and SBC

Control Section
Basic

Maximum Installation Altitude
4000m

Output Current Rating
1.1A

Mounting
Direct Mounting Inside Control Cabinet

Switching Frequencies
4kHz, 8kHz, 12kHz, 16kHz

Cooling Method
Natural Convection

Optional Connection Power Requirement
Increased

Voltage Arcing Risk
Yes

Ready Relay Contacts
Mains Voltage Supplied

Overheating Safety Measure
Fuse

Maximum Leakage Capacitance
33nF at 4kHz Clocking

Parallel Connection Proximity Requirement
Highest Power Consumption Device Near Power Supply

Maximum Current Rating
3A

Environmental Hazards
Free of Asbestos and Hydrocarbons

Additional Features
Touch Guard and MicroSD-Type Memory Card

Transportation Absolute Humidity
1g/m3 to 60g/m3

Minimum Adjacent Equipment Spacing
10mm

Support Duration
1 Year.

Common Misspellings

Shipping & Payment Options
DHL-logo FexEd-logo UPS-logo freight-icon

AmEx-icon Mastercard-icon Visa-icon wire-transfer-icon
Warranty
1-year-warranty
Indramat USA 1 Year Warranty
Repair
We offer a repair service for the HCS01.1E-W0003-A-02-B-ET-EC-PB-L4-NN-FW.
Indramat Is Trusted By
motion-industries-logo
3m-logo
IBM-logo
GexPro-logo
caterpillar-logo
nasa-logo
ford-logo
vallen-logo