R911331625 (HCS01.1E-W0003-A-02-E-S3-EC-NN-L4-NN-FW)

Name: R911331625 (HCS01.1E-W0003-A-02-E-S3-EC-NN-L4-NN-FW)
Brand: Indramat Drives
SKU: HCS01.1E-W0003-A-02-E-S3-EC-NN-L4-NN-FW
Price: 674.00 USD
Availability: InStock

HCS IndraDrive Controllers

In-Stock, Ships 3-5 Days

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone

Part Number

+Add a message

Message

Request a Replacement

Request a Repair

Quote Both

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone:
1-888-551-3082

Email:
sales@indramat-usa.com

The Bosch Rexroth drive controller with MPN R911331625 (HCS01.1E-W0003-A-02-E-S3-EC-NN-L4-NN-FW) features a modular structure and supports SERCOS III/EtherCAT communication interfaces. Designed for flexible encoder connectivity via IndraDyn Hiperface and EnDat 2.1/2.2, it incorporates integrated safety with Safe Torque Off (STO) and Safe Brake Control (SBC). The controller operates on a 3 x AC 110–230 V ±10% mains supply at 50–60 Hz, delivers a peak current of 3 A, and relies on natural convection for cooling. The IP20 housing provides basic protection, and a 90 mm clearance above and below is recommended during installation. Firmware must be specified separately, as referenced by the type plate.

Technical Specifications

Communication Interface
SERCOS/EtherCat

Safety Modules
Safe brake control, safe torque off

Optional Hardware Module Slots
1

Power Input
110 to 230 Volts AC

Mains Frequency Range
50 to 60 Hz

Input Frequency Tolerance
±2 Hz

Max Permitted Mains Frequency Rate of Change
2 Hz per second

Short Circuit Rating
42000 Amps rms

Rated Controller Output
3 Amps

Cooling Method
Natural convection

Minimum Spacing Requirement (Top and Bottom Sides)
90 mm

Heat Dissipation Method
Inside the cabinet

Recommended Ambient Temperature
0 to 40 degrees Celsius

Controller Housing Rating
IP20

Firmware
Available as a separate subposition

Frequently Asked Questions

Where does the Bosch Rexroth HCS01.1E-W0003-A-02-E-S3-EC-NN-L4-NN-FW controller derive its infeed power supply configuration?

It operates in infeeding/feeded mode with a 3-phase 110–230V AC line supply, distributing regulated DC power to connected axis controllers.

How does the internal air-cooling system of the HCS01.1E-W0003-A-02-E-S3-EC-NN-L4-NN-FW controller sustain thermal stability?

The integrated blower ensures consistent airflow, maintaining component temperature within operating limits and extending system life under continuous duty cycles.

What encoder feedback types can be interfaced with the Bosch Rexroth HCS01.1E-W0003-A-02-E-S3-EC-NN-L4-NN-FW controller?

It supports Hiperface and EnDat 2.1/2.2 encoders for absolute/relative positioning feedback and high-resolution speed synchronization with the drive’s motion processor.

Does the HCS01.1E-W0003-A-02-E-S3-EC-NN-L4-NN-FW controller include safety compliance features?

Yes, it features integrated STO (Safe Torque Off) and SBC (Safe Brake Control) for machine safety under EN ISO 13849-1 and IEC 61508.

What is the rated peak current capacity for the HCS01.1E-W0003-A-02-E-S3-EC-NN-L4-NN-FW controller?

The device handles up to 3A peak current for short-duration overloads, supporting rapid acceleration phases in servo-controlled applications.

Common Misspellings

HCS011EW0003A02ES3ECNNL4NNFW

HCS01 1E W0003 A 02 E S3 EC NN L4 NN FW

hcs04.2e-w1010-n-04-nnnn

HCS1.1E-W0003-A-02-E-S3-EC-NN-L4-NN-FW

Internal Product Review

The HCS01.1E-W0003-A-02-E-S3-EC-NN-L4-NN-FW controller by Bosch Rexroth Indramat is a part of efficient HCS drive series. It has SERCOS III communication and STO/SBC safety interface integration. It is widely applied in robotics domains and precise heavy duty machinery applications in industrial setups.