R911331681 (HCS01.1E-W0018-A-03-E-S3-EC-NN-L4-NN-FW)
HCS IndraDrive Controllers
Technical Specifications
Application
Commercial and Industrial
Maximum Current
18 Amps
Input Voltage
200 to 500 Volts AC
Phases
Three-phase
Temperature Range
0 to 40 degrees Celsius
Elevation
0 to 1000 meters
Output De-rating Temperature
40 to 55 degrees Celsius
Maximum Operating Temperature
55 degrees Celsius
Maximum Elevation
4000 meters
Relative Humidity
5 to 95%
Absolute Humidity
1 to 29 g/m3
Climatic Degree
3K3
Pollution Degree
2
IP Rating
IP20
Communication
SERCOS/EtherCat
Encoder Interface
Multi-encoder
Safety Features
Safe torque off, Safe brake control
Control Panel
Standard
Installation
Qualified personnel only
Frequently Asked Questions
What ambient temperature must be maintained for safe operation?
The ambient temperature must not exceed 40 °C under nominal load to avoid thermal stress and internal derating. The controller may require forced cooling or derating above this threshold.
What moisture and condensation constraints apply to installation?
The drive must be installed in areas where condensation cannot occur to protect against insulation breakdown. The enclosure should maintain internal humidity below dew point thresholds.
How does HCS01.1E-W0018-A-03-E-S3-EC-NN-L4-NN-FW handle airborne contamination?
The unit is rated for Pollution Degree 2, restricting use to environments with non-conductive dust only. The cabinet must filter or seal against conductive contaminants and particles.
What grounding requirements suit higher leakage current levels?
The equipment grounding conductor must meet minimum cross-section specifications (≥ 10 mm² copper or equivalent). The grounding ensures safe discharge of leakage currents exceeding 3.5 mA under fault or normal conditions.
How must spacing clearances be managed in chassis mounting?
The controller requires at least 90 mm clearance above and below for proper convection airflow. The spacing avoids heat buildup and ensures thermal stability in dense cabinet layouts.
Common Misspellings
HCS011EW0018A03ES3ECNNL4NNFW
HCS01 1E W0018 A 03 E S3 EC NN L4 NN FW
hcs01.1e-w0018-a-03-a-et-ec-nn-l3-nn-fw
HCS1.1E-W0018-A-03-E-S3-EC-NN-L4-NN-FW
Internal Product Review
The HCS01.1E-W0018-A-03-E-S3-EC-NN-L4-NN-FW by Bosch Rexroth supports EtherCAT connectivity, includes a multi-encoder interface with EnDat and Hiperface compatibility, and features safety level L4 with Safe Torque Off and Safe Brake Control. Its IP20-rated design with internal air cooling suits automated assembly, packaging, and robotics environments.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the HCS01.1E-W0018-A-03-E-S3-EC-NN-L4-NN-FW.
Want to 
