R911333497 (HCS01.1E-W0018-A-03-E-S3-EC-NN-L4-AA-FW)
HCS IndraDrive Controllers
Technical Specifications
Power Supply
Feeding type
Cooling System
Forced air cooling
Operating Temperature
0 to 40 degrees Celsius
Derated Output Operating Temperature
Up to 55 degrees Celsius
Spacing Required
Minimum 90 millimeters
Protection Degree
IP20
Mounting Orientation
Vertical
Mounting Method
Rear side attachment
Braking Resistors Location
Back
Mounting Clearence
Sufficient for back-side mounting
Current Output
18 Amps
Input Voltage
200 to 400 Volts AC
Control Panel
Standard (included)
Firmware
Ordered separately
Frequently Asked Questions
What is the allowed input voltage and tolerance range?
The drive accepts 3 × AC 200–500 V with a ±10 % tolerance to accommodate typical industrial mains variation. The wide range ensures global deployment without need for step-down or upconverters.
What is the nominal output current rating for this unit?
The continuous output current is rated at 7.6 A, matching mid-range servo and motor loads. The rating balances compact form factor with sufficient drive capability for many applications.
Which output frequency span does the controller support?
The output frequency ranges from 0 to 1600 Hz, enabling both low-speed precision and high-speed motion control. The broad range supports varied motor profiles and application flexibility.
What is the continuous power dissipation value of this controller?
The continuous power dissipation is 80 W under full current load conditions, reflecting inherent internal losses. The dissipation spec is critical for thermal planning and deciding cooling or spacing strategies.
What rated control voltage does this model require?
The control electronics use a 24 V supply with ±20 % tolerance for stable operation. The specification ensures compatibility with standard industrial DC control systems and protection against voltage drops.
Common Misspellings
HCS011EW0018A03ES3ECNNL4AAFW
HCS01 1E W0018 A 03 E S3 EC NN L4 AA FW
hcs01.1e-w0018-a-03-a-et-ec-em-l3-nn-fw
HCS1.1E-W0018-A-03-E-S3-EC-NN-L4-AA-FW
Internal Product Review
The IndraDrive HCS01.1E‑W0018‑A‑03‑E‑S3‑EC‑EP‑L4‑NN‑FW by Bosch Rexroth accepts 3×AC 200–500 V and supports a peak current of 18 A. It features Sercos III communication (S3), integrated encoder support (EC), and safety functions at L4 level. This drive is suited for use in automation lines, robotics, and CNC machines needing deterministic motion control.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the HCS01.1E-W0018-A-03-E-S3-EC-NN-L4-AA-FW.
Want to 
