R911338058 (HCS01.1E-W0018-A-02-A-CC-EC-ET-NN-NN-FW)

HCS IndraDrive Controllers

HCS01.1E-W0018-A-02-A-CC-EC-ET-NN-NN-FW Series Image

Call For Quote

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone

Part Number

+Add a message

Message

Request a Replacement

Request a Repair

Quote Both

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone:
1-888-551-3082

Email:
[email protected]

The R911338058 (HCS01.1E-W0018-A-02-A-CC-EC-ET-NN-NN-FW) is a Bosch Rexroth drive controller from the HCS01 line, designed for controlling IndraDrive automation drive systems. It supports SERCOS III master communication and integrates encoder interfaces for IndraDyn Hiperface/EnDat 2.1/2.2, along with a MultiEthernet interface. The controller operates on 3 x AC 110–230 V ±10% mains voltage and achieves a device peak current of 18 A. It incorporates internal air cooling via an integrated blower, is rated IP20, and must be paired with an ADVANCED control section. Firmware is ordered separately.

Technical Specifications

Applications
Specific and general automation

Motor Compatibility
Can be used in conjunction with MSM motors

Frequently Asked Questions

How does SERCOS III master (cross-communication) in HCS01.1E-W0018-A-02-A-CC-EC-ET-NN-NN-FW improve coordinated motion?

It provides deterministic, cyclic data exchange between drives and controllers for allowing sub-millisecond synchronization across axes. It minimizes skew in camming/gantry applications and simplifies peer-to-peer data sharing without PLC overhead.

Which industries benefit most from this controller’s 18 A device peak capability? (HCS01.1E-W0018-A-02-A-CC-EC-ET-NN-NN-FW)

Its short bursts to 18 A supports rapid indexing, tensioning and acceleration in packaging, printing/converting, machine tools, robotics/handling and semiconductor front-end tools. It fits low-power and high-dynamic axes requiring crisp settle times.

Why specify Multi-Ethernet plus SERCOS III on HCS01.1E-W0018-A-02-A-CC-EC-ET-NN-NN-FW?

Its multi-protocol hardware lets you deploy PROFINET, EtherNet/IP, EtherCAT or SERCOS III via firmware for easing OEM platform reuse. Its deterministic SERCOS III covers hard real-time axes, while other Ethernet stacks interface upstream MES/PLC layers.

What’s the role of Interface 1 (Hiperface/EnDat 2.1/2.2) for precision?

The digital absolute encoders deliver high-resolution position/diagnostics and automatic motor-data handling for tightening servo loops. It improves contour accuracy and restart behavior after power cycles without homing routines.

How does the internal air-cooling (integrated blower) impact cabinet design for HCS01.1E-W0018-A-02-A-CC-EC-ET-NN-NN-FW?

The self-contained blower moves heat to the drive front for reducing reliance on enclosure airflow paths. It enables dense layouts in retrofits where ducting space is constrained, with simpler maintenance.

Common Misspellings

Internal Product Review

The HCS01.1E-W0018-A-02-A-CC-EC-ET-NN-NN-FW controller from IndraDrive series streamlines 3-phase 110–230 V ±10% installations with IP20 protection and internal blower. Its SERCOS III master cross-communication, Multi-Ethernet and Hiperface/EnDat encoders enable deterministic multi-axis control. This drive offers 18 A of peak current to suit installation in robotics and semiconductor equipment that needs peak starts and precise positioning.