R911338334 (HCS01.1E-W0005-A-03-B-ET-EC-NN-L3-NN-FW)

Why was MultiEthernet chosen over PROFIBUS in this variant?

The multiEthernet offers higher bandwidth and flexibility for modern Ethernet-based automation architectures. It supports real-time deterministic communication suited for high-speed control loops.

What advantages do HIPERFACE / EnDat encoder interfaces provide in the HCS01.1E-W0005-A-03-B-ET-EC-NN-L3-NN-FW controller?

These interfaces of HCS01.1E-W0005-A-03-B-ET-EC-NN-L3-NN-FW controller allow high-resolution feedback with minimal latency and error checking. It improves motion precision and closed-loop stability.

What firmware flexibility is offered in this HCS01.1E-W0005-A-03-B-ET-EC-NN-L3-NN-FW controller?

The firmware of HCS01.1E-W0005-A-03-B-ET-EC-NN-L3-NN-FW controller is modularly licensed and must be ordered as a sub-position. Users can enable features such as motion control, safety function sets, or diagnostics.

How is peak current 5 A realized and what is continuous current?

The 5 A rating is a short-duration peak capacity for dynamic loads. Continuous current is lower—typically the thermal limit in spec data.

What is the typical switching frequency used in this controller?

The switching frequency is parameterizable via P-0-0001 in the drive settings. Users choose between efficiency or performance modes.

HCS011EW0005A03BETECNNL3NNFW

HCS01 1E W0005 A 03 B ET EC NN L3 NN FW

hcs01.1e-w0003-a-02-b-et-ec-nn-l4-aa-fw

HCS1.1E-W0005-A-03-B-ET-EC-NN-L3-NN-FW

The HCS01.1E-W0005-A-03-B-ET-EC-NN-L3-NN-FW controller demonstrates exceptional performance with its deterministic MultiEthernet communication and integrated STO safety functionality. Operating on a 3 × 200–500 V AC supply with a 5 A peak current, it ensures reliable performance in compact automation environments. The internal blower cooling system maintains thermal stability under continuous operation.