1-888-551-3082 | 1-919-443-0207 | [email protected]

R911339364 (HCS01.1E-W0018-A-02-B-ET-EC-CN-NN-NN-FW)

HCS IndraDrive Controllers

HCS01.1E-W0018-A-02-B-ET-EC-CN-NN-NN-FW Series Image

Call For Quote

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone

Part Number

+Add a message

Message

Request a Replacement

Request a Repair

Quote Both

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone:
1-888-551-3082

Email:
[email protected]

The Bosch Rexroth drive controller R911339364 (HCS01.1E-W0018-A-02-B-ET-EC-CN-NN-NN-FW) is designed for use in digital and label printing as well as positioning systems. This HCS01 series unit supports a MultiEthernet communication interface and is paired with a BASIC control section (design type B). The device provides two probe inputs, integrates internal air cooling via a blower, and supports memory card usage for extended control panel functions. Connectivity is handled through a 9-pole D-Sub X61 connector for CANopen interface, while encoder feedback supports IndraDyn Hiperface/EnDat 2.1/2.2. The unit requires a clearance of 90 mm above and below for correct operation and accommodates mains voltages from 3 x AC 110 V to 230 V ±10%. It features a peak output current of 18 A, offers overheating protection via fuse, and incorporates an isolating transformer to reduce mains leakage current. The IP20-rated enclosure conforms to design version 1; firmware is ordered separately.

Technical Specifications

Probe Inputs
2

Interface
CANopen

Cooling Mechanism
Internal Air Circulation

Extra Slot
Memory Card

Firmware
Separate Subitem Required

Installation Conditions
Specified Only

Interference Suppression Measures
Needed for Residential Areas

Danger Factors
Injury Electric Shock Property Damage

Voltage
Dangerous During Operation

Clearance Distance
90mm (Above and Below)

CANopen Interface Connection
X61 Connector with a D-Sub Connector (9 Poles)

Grounding Requirement
Connected Unused Spare Cables

Backup Support
1 Year from Indramat USA

Inclusion
Electrolytic Capacitors

Transport Temperature
-20°C to 70°C

DC bus Coupling
Not Supported

Cable Positioning
Near Grounded Metal Surfaces

Mains Transformer
Needed for Higher Mains Voltage than Permitted

Safety Measure
Fuse against Overheating

Shipping
Freight Carriers with a Worldwide Presence.

Common Misspellings

1620 Old Apex Road
Cary, NC 27513, USA

Toll Free: 1-888-551-3082
International: 1-919-443-0207

Fax: 1-919-867-6204

[email protected]

Shipping & Payment Options

Warranty

Indramat USA 1 Year Warranty

Repair

We offer a repair service for the HCS01.1E-W0018-A-02-B-ET-EC-CN-NN-NN-FW.

Exchange

Want to sell your HCS01.1E-W0018-A-02-B-ET-EC-CN-NN-NN-FW?

Indramat Is Trusted By

Quick Links

Terms and Policies

North Carolina Office

Indramat USA
1620 Old Apex Road
Cary, NC 27513
USA

Phone

Toll Free: 1-888-551-3082
International: 1-919-443-0207

Indramat USA sells factory new and pre-owned surplus products and maintains channels to procure supply. Indramat USA is not affiliated with nor an authorized distributor or representative of any manufacturers, brands or products listed. Designated trademarks, brand names, and brands appearing herein are the property of their respective owners.