R911339368 (HCS01.1E-W0003-A-02-B-ET-EC-CN-L3-NN-FW)

Name: R911339368 (HCS01.1E-W0003-A-02-B-ET-EC-CN-L3-NN-FW)
Brand: Indramat Drives
SKU: HCS01.1E-W0003-A-02-B-ET-EC-CN-L3-NN-FW
Price: 230.00 USD
Availability: InStock

HCS IndraDrive Controllers

In-Stock, Ships 3-5 Days

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone

Part Number

+Add a message

Message

Request a Replacement

Request a Repair

Quote Both

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone:
1-888-551-3082

Email:
sales@indramat-usa.com

The Bosch Rexroth drive controller, MPN R911339368 (HCS01.1E-W0003-A-02-B-ET-EC-CN-L3-NN-FW), is designed for automation applications requiring single- or multi-axis control and drive tasks. This device supports a three-phase input voltage of 110 to 230 V ±10% and features an integrated blower for forced-air cooling, classified under IP20 protection. Key interfaces include multi-Ethernet connectivity, CANopen, and a multiple encoder interface (IndraDyn Hiperface/EnDat 2.1/2.2), along with an L3 safety torque off (STO) function. The unit operates within a temperature range of -10 to +40 °C and can be stored or transported between -25 and +75 °C, at altitudes up to 1,000 meters. It tolerates humidity up to 95% and pollution up to level 2, with a peak device current of 3 A. Firmware is ordered separately.

Technical Specifications

Product Type
Drive Controller

Encoder Interface
Multiple Encoder Interface 1

Storage Temperature
-25 to +75 degrees Celsius

Location Placement
Up to 1,000 meters above sea level

Cooling Method
Forced Airflow

Protection Grade
IP20

Air Requirements
Filtered and Purified

Operating Temperature
-10 to +40 degrees Celsius

Interface
L3 STO (Safe Torque Off)

Connectivity
Multi-Ethernet

Applications
Single-Axis and Multi-Axis Control and Drive

Power Supply
Feeding Power Supply Unit

Output Current
1.1 A

Humidity Condition
95% Relative Humidity (Without Condensation)

Pollution Level
Category 2

Professional Installation Required
Yes

Control Section
Basic

Weight
1.30 Kilograms

After Sales Services
Provided by Indramat USA

Frequently Asked Questions

How is fieldbus communication handled in the HCS01.1E-W0003-A-02-B-ET-EC-CN-L3-NN-FW controller?

It supports EtherCAT and CANopen fieldbus protocols, enabling synchronous motion control and real-time data exchange with master PLCs.

Does the Bosch Rexroth Indramat HCS01.1E controller allow firmware parameterization via USB?

Yes, its USB service interface enables firmware flashing and parameter cloning through IndraWorks DS configuration software.

How does the HCS01.1E controller ensure smooth start-up in multi-axis networks?

It uses bus-synchronized initialization with deterministic start-up sequencing, reducing inrush surges and enabling phase-balanced ramp-up.

How does the Bosch Rexroth Indramat HCS01.1E controller perform during high-overload cycles?

Its IGBT module and temperature-compensated current control sustain 200 % rated overload for 3 seconds, ensuring torque peaks under transient load.

How does firmware protect against data corruption in the HCS01.1E controller?

The system utilizes dual-bank flash ROM architecture with checksum verification and rollback for safe firmware recovery.

Common Misspellings

HCS011EW0003A02BETECCNL3NNFW

HCS01 1E W0003 A 02 B ET EC CN L3 NN FW

hcs03.1e-w0210-a-05-nnnv-aa

HCS1.1E-W0003-A-02-B-ET-EC-CN-L3-NN-FW

Internal Product Review

The HCS01.1E-W0003-A-02-B-ET-EC-CN-L3-NN-FW controller by Bosch Rexroth Indramat from the HCS series delivers precise one-axis drive control. It consumes 3.3–54 A output current and up to 14 kW power for stable operation. It is used in servo axis drives and heavy machinery applications requiring dynamic control efficiency.