R911339984 (HCS01.1E-W0018-A-02-A-CC-EC-EC-L3-NN-FW)
HCS IndraDrive Controllers
Technical Specifications
Maximum Installation Altitude
1000m
Applicable Standards
NFPA 79
Preferred Orientation
Not upright
Storage Maintenance
Run for at least an hour annually
Mounting Screws
M6x20
Tightening Torque
6Nm
Grounding Conductor Connection
Yes
Terminal Connectors
With strain relief
Pollution Degree
2
Depth
196mm
Power Dissipation
70W at continuous current
Backup Duration
One year
Safety Technology
Safe Torque OFF
Encoder Connection
Through X4 connector
Design
Standard
Function
Programmable
Operation Environment
Not for underwater use
Delivery
Global shipping available
Frequently Asked Questions
What encoder options are supported, and why do dual interfaces matter for this product code?
The unit supports IndraDyn Hiperface and EnDat 2.1/2.2 to enable absolute position tracking and high-resolution velocity estimation. Its dual channels simplify commissioning (primary/aux) and allow redundancy or mixed feedback strategies for applications like gantries and synchronized conveyors.
How does the internal air (integrated blower) cooling of HCS01.1E-W0018-A-02-A-CC-EC-EC-L3-NN-FW affect cabinet design and thermal derating?
The built-in blower enhances internal convection for maintaining thermal headroom without external heat sinks. Its designers can maintain compact cabinet spacing while meeting IP20 guidelines and managing ambient-temperature-dependent derating curves.
Why is STO (Safe Torque Off) important on HCS01.1E-W0018-A-02-A-CC-EC-EC-L3-NN-FW, and how is it typically wired?
It removes the drive’s ability to generate torque without cutting mains for supporting safety categories that reduce risk during access. It’s wired via dedicated safety inputs to interlocked with external E-Stops or gate switches.
How does IP20 protection influence enclosure and environment requirements for HCS01.1E-W0018-A-02-A-CC-EC-EC-L3-NN-FW?
It implies finger-safe protection and no water ingress protection, so installation inside a suitable control cabinet is required. It is important to provide filtered airflow and comply with spacing to maintain safe operation.
What commissioning sequence helps achieve deterministic motion when multiple HCS01 drives share a SERCOS III ring?
It is recommended to establish physical ring, set IP/MAC parameters per segment and synchronize cycle/phase parameters across all nodes.
Common Misspellings
HCS011EW0018A02ACCECECL3NNFW
HCS01 1E W0018 A 02 A CC EC EC L3 NN FW
hcs01.1e-w0013-a-02-a-et-ec-da-nn-nn-fw
HCS1.1E-W0018-A-02-A-CC-EC-EC-L3-NN-FW
Internal Product Review
The Bosch Rexroth Indramat's HCS01.1E-W0018-A-02-A-CC-EC-EC-L3-NN-FW drive controller is presented in an IP20 rated enclosure and ventilation blower. It pairs an ADVANCED control section with SERCOS III master cross-communication and dual IndraDyn Hiperface/EnDat feedback for precise operations. This drive runs on a 3-phase 110–230 V source supply and supports 18 A of peak load in industrial lines such as logistics and printing.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the HCS01.1E-W0018-A-02-A-CC-EC-EC-L3-NN-FW.
Want to 
