R911340075 (HCS01.1E-W0003-A-02-B-ET-EC-NN-S4-NN-FW)

HCS IndraDrive Controllers

HCS01.1E-W0003-A-02-B-ET-EC-NN-S4-NN-FW Series Image

Call For Quote

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone

Part Number

+Add a message

Message

Request a Replacement

Request a Repair

Quote Both

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone:
1-888-551-3082

Email:
[email protected]

The R911340075 (HCS01.1E-W0003-A-02-B-ET-EC-NN-S4-NN-FW) drive controller, a distinguished Bosch Rexroth product, demands strict adherence to safe operative practices due to its sensitivity. Always kept in compliance with EMC conditions during installation, the device hosts numerous connectors, but these should not be adjusted when the controller is powered. Operator, software, or firmware glitches may cause hazardous movements in the linked motor. Maintenance or cleaning necessitates disconnecting the power supply to ensure safety, as the controller's housing tends to heat. After power disconnection, a minimum cooling duration of 15 minutes is advised to prevent burns. Be cautious not to interact with the product when it is pressurized. Suitable operating temperatures span between 0-40°C, while it also adheres to IEC 721's 3K3 climatic category. It may not be mounted horizontally and holds a one-year warranty. Further specifications include a +/-10% tolerance rated input voltage, a maximum power rating of 12.7W, and pulse-shaped leakage current. Units can be shipped globally. The device functions optimally under 45°C, beyond which a mains filter is recommended.