R911340078 (HCS01.1E-W0018-A-03-B-ET-EC-EC-S4-NN-FW)

Name: R911340078 (HCS01.1E-W0018-A-03-B-ET-EC-EC-S4-NN-FW)
Brand: Indramat Drives
SKU: HCS01.1E-W0018-A-03-B-ET-EC-EC-S4-NN-FW
Price: 897.00 USD
Availability: InStock

HCS IndraDrive Controllers

In-Stock, Ships 3-5 Days

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone

Part Number

+Add a message

Message

Request a Replacement

Request a Repair

Quote Both

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone:
1-888-551-3082

Email:
sales@indramat-usa.com

The Bosch Rexroth R911340078 (HCS01.1E-W0018-A-03-B-ET-EC-EC-S4-NN-FW) is an HCS Drive Controller engineered for operation on a 3-phase AC supply voltage of 200 to 500 V ±10%, delivering up to 18 A peak current. It features MultiEthernet communication, extension capability for digital and analog I/O, and compatibility with third-party motors per specified guidelines. The unit includes a BASIC control section, encoder interfaces supporting IndraDyn Hiperface and EnDat 2.1/2.2, and internal air cooling via an integrated blower. The IP20-rated controller is intended for installation within closed housing, incorporating a grounding connection and safe motion functional safety. Bus connections utilize shielded cables up to 10 m, and control/signal lines should maintain at least 100 mm separation from power cables. Device operation requires appropriate fusing and exclusion from central supply systems.

Technical Specifications

Mains Connection Voltage
3 x 200VAC to 500VAC

Operating Modes
Converter, Servo Drive

Additional Feature
DC bus coupling

Scalable Signals
Yes

Combined I/O Function
Digital Input or Output

Control Section Location
Inside power section

Relay Contact Connection Point
X47

Cable Type
Shielded

Cable Length
10m Maximum

DC Bus Connection
Yes

Discharge Duration
30 minutes

Grounding Connection
For functional safety

Despatch
Worldwide

Safety Mechanism
Safe Motion

Recommended Motor Range
MSM041

Degree of Pollution
2

Mounting
Standard Inside Housing

Central Supply Compatibility
Not Recommended

Fire Risk
If no fuse installed before

Material of Connection Elements
Highly conductive surface

Control and Signal Lines Distance
At least 100mm from power cables.

Frequently Asked Questions

How does the drive respond to load variations?

Its adaptive current control maintains torque stability during rapid load changes. This ensures precise motion behavior and reduces mechanical stress across interconnected system elements.

What are the integration considerations for external braking resistors?

External resistors must align with specified dissipation and resistance parameters. Correct selection prevents overvoltage faults and ensures safe energy discharge during regenerative operation cycles.

How does HCS01.1E-W0018-A-03-B-ET-EC-EC-S4-NN-FW maintain operational stability?

The controller employs rapid feedback loops for current and speed regulation. This stabilizes motion control and limits electrical noise that could affect neighboring devices.

How does ambient temperature influence drive operation limits?

Elevated temperatures increase internal heat accumulation and may trigger thermal derating. Proper ventilation and cabinet cooling preserve continuous torque delivery and hardware reliability.

Which supporting components improve system coordination and reliability?

Pairing with Rexroth IndraDyn motors and compatible firmware enables precise synchronization. This configuration enhances efficiency and reduces commissioning adjustments during multi-axis installations.

Common Misspellings

HCS011EW0018A03BETECECS4NNFW

HCS01 1E W0018 A 03 B ET EC EC S4 NN FW

hcs01.1e-w0018-a-02-b-et-ec-pb-nn-nn-fw

HCS1.1E-W0018-A-03-B-ET-EC-EC-S4-NN-FW

Internal Product Review

The HCS01.1E‑W0018‑A‑03‑B‑ET‑EC‑EC‑S4‑NN‑FW by Bosch is a drive controller used in automation systems. It supports MultiEthernet communication and dual encoder interfaces. The unit includes Safe Motion (S4) safety and uses internal air cooling. It is used in robotics, textile machines, CNC tools, and packaging lines.