R911342165 (HCS01.1E-W0005-A-03-B-ET-EC-NN-S4-NN-FW)
HCS IndraDrive Controllers
Technical Specifications
Product type
Drive Controller
Third-party motor compatibility
Yes
Operating temperature
Up to 55°C
Leakage current
More than 3.5mA
Cross-section outer conductor
Less than 8AWG
Cool down period
15 minutes
Functionality
Controls the holding brake of the motor
Operating environment
Not approved for underwater use
Residential area operation
Not permitted
Drive system
Includes motor, supply unit, and encoder
Additional equipment
May require additional sensors and actuators
Mounting and installation
Required for safe operation
Backup support
1 year
High voltage risk
If connected incorrectly
Grounding conductor
Operation restricted without this connection
Emergency stop switch
Required for commissioning
Power connection
Requires safe starting lockout
Surface temperature during operation
More than 60°C
Disconnection
Not allowed in a de-energized state
Mains voltage
3 x 230VAC to 500VAC
Delivery
Worldwide.
Frequently Asked Questions
How does the encoder feedback affect stability in HCS01.1E-W0005-A-03-B-ET-EC-NN-S4-NN-FW drive controller under load change?
The feedback loop via Hiperface/EnDat of HCS01.1E-W0005-A-03-B-ET-EC-NN-S4-NN-FW drive controller enables fast correction of torque and position deviations, minimizing overshoot or oscillation. It stabilizes dynamic response during abrupt changes.
How does the design version “1” influence the HCS01.1E-W0005-A-03-B-ET-EC-NN-S4-NN-FW drive controller’s lifecycle?
The Version 1 in HCS01.1E-W0005-A-03-B-ET-EC-NN-S4-NN-FW drive controller indicates the first generation architecture, affecting software compatibility, spare parts, and firmware evolution. Users should verify support for newer updates or backward compatibility.
What constraints arise from the 3× 200–500 V ±10% rating in this controller?
This voltage range allows compatibility with wide industrial mains, but requires proper filtering and protective fusing to manage ±10% variance. It mandates stable supply and surge protection.
Why must firmware be ordered separately for the HCS01.1E-W0005-A-03-B-ET-EC-NN-S4-NN-FW drive controller?
The separating firmware inn HCS01.1E-W0005-A-03-B-ET-EC-NN-S4-NN-FW drive controller allows flexible selection of motion functions, safety modules, and protocol options at configuration time. It reduces redundant firmware loads and enables upgrades.
How does the integrated blower cooling benefit the this controoler?
The internal blower actively forces airflow through the unit, maintaining thermal stability even under high load. It removes the need for external cooling and preserves compact form factor.
Common Misspellings
HCS011EW0005A03BETECNNS4NNFW
HCS01 1E W0005 A 03 B ET EC NN S4 NN FW
hcs01.1e-w0003-a-02-b-et-ec-pb-nn-nn-fw
HCS1.1E-W0005-A-03-B-ET-EC-NN-S4-NN-FW
Internal Product Review
The HCS01.1E-W0005-A-03-B-ET-EC-NN-S4-NN-FW is manufactured by Bosch Rexroth that is used for precise motion control and operate on the 3×AC 200–500 V ±10% power handling. With IP20 protection and integrated MultiEthernet interface, it ensures reliable operation in compact automation systems. It is widely used in robotics and conveyor synchronization for high-speed accuracy.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the HCS01.1E-W0005-A-03-B-ET-EC-NN-S4-NN-FW.
Want to 
