R911344819 (HCS01.1E-W0018-A-02-B-ET-EC-CN-L3-NN-FW)

HCS IndraDrive Controllers

HCS01.1E-W0018-A-02-B-ET-EC-CN-L3-NN-FW Series Image

Call For Quote

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone

Part Number

+Add a message

Message

Request a Replacement

Request a Repair

Quote Both

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone:
1-888-551-3082

Email:
[email protected]

The Bosch Rexroth drive controller with MPN R911344819 (HCS01.1E-W0018-A-02-B-ET-EC-CN-L3-NN-FW) is a category C3 industrial device measuring 268 mm in height and designed for vertical rear mounting on control cabinet surfaces. It supports SSI and 1Vpp sin-cos encoders, incorporates integrated brake current measurement and monitoring, and is rated for a short circuit current of 42,000 Arms. The unit features eight digital inputs, a reference potential for digital I/O at X13.1 and X13.2, and networking via multi-Ethernet interfaces (X24, X25) compliant with IEEE 802.3. Cooling is managed through an internal forced ventilation blower. Additional technical characteristics include mains voltage of 3 x AC 110–230 V ±10%, device peak current of 18 A, control section BASIC (B), encoder interfaces (IndraDyn Hiperface/EnDat 2.1/2.2), CANopen support, and STO (Safe Torque Off) safety interface. The device is rated to IP20 and is not suitable for non-industrial environments or installation above thermally sensitive materials. Firmware must be ordered separately.