R911347676 (HCS01.1E-W0008-A-03-A-ET-EC-EC-S4-NN-FW)

HCS IndraDrive Controllers

HCS01.1E-W0008-A-03-A-ET-EC-EC-S4-NN-FW Series Image

Call For Quote

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone

Part Number

+Add a message

Message

Request a Replacement

Request a Repair

Quote Both

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone:
1-888-551-3082

Email:
[email protected]

The R911347676 (HCS01.1E-W0008-A-03-A-ET-EC-EC-S4-NN-FW) is a Bosch Rexroth HCS01 series drive controller featuring a modular structure with power section, control section, and a functional control panel. The device utilizes MultiEthernet as the primary communication interface and supports two multi-encoder modules compatible with IndraDyn, Hiperface, and EnDat 2.1/2.2 encoders. A safety module is integrated for safe motion monitoring. The unit operates from a 3 x AC 200–500 V ±10% mains input and provides up to 8 A device peak current. Optimal operation is specified for 0–40°C and elevations up to 100 m. The controller features air cooling via an integrated blower, has an IP20 enclosure, and should be installed in a protected cabinet with adequate clearance for heat dissipation. Physical dimensions are 205 x 196 x 60 mm and weight is 1.3 kg. Firmware is ordered separately.

Technical Specifications

Control Panel Compatibility
Standard with Single-line Display

Firmware
Ordered Separately

Master Communication Interface
Multi-Ethernet

Input Voltage Range
200 to 500 Volts AC (Three-phase)

Maximum Output Current Rating
8 Amps

Enclosure
IP20 Rating

Weight
1.3 Kilograms

Dimensions
205 x 196 x 60 Millimeters.

Frequently Asked Questions

How do the dual encoder interfaces benefit the HCS01.1E-W0008-A-03-A-ET-EC-EC-S4-NN-FW?

Dual encoders on HCS01.1E-W0008-A-03-A-ET-EC-EC-S4-NN-FW provide redundant position channels or permit mixed-protocol feedback simultaneously. This redundancy increases fault detection capability and helps preserve precise trajectory control even if one sensor degrades.

Which communication system operates in the HCS01.1E-W0008-A-03-A-ET-EC-EC-S4-NN-FW?

MultiEthernet is implemented on HCS01.1E-W0008-A-03-A-ET-EC-EC-S4-NN-FW to allow concurrent Ethernet protocol support for PLCs and supervision. This dual-level communication enables fast local control and broad system visibility without complex gateways.

How does cooling contribute to the reliability of the HCS01.1E-W0008-A-03-A-ET-EC-EC-S4-NN-FW?

The HCS01.1E-W0008-A-03-A-ET-EC-EC-S4-NN-FW uses directed blower cooling to maintain low junction temperatures during continuous operation. Consistent thermal management reduces drift in control loops and lengthens component service life when maintained properly.

What control section pairs with the HCS01.1E-W0008-A-03-A-ET-EC-EC-S4-NN-FW?

The BASIC control section is the standard match for HCS01.1E-W0008-A-03-A-ET-EC-EC-S4-NN-FW, delivering an uncomplicated configuration baseline. This pairing reduces commissioning overhead and is ideal for repeatable machine designs.

How does firmware customization enhance the HCS01.1E-W0008-A-03-A-ET-EC-EC-S4-NN-FW?

Custom firmware for HCS01.1E-W0008-A-03-A-ET-EC-EC-S4-NN-FW enables optimized encoder handling and advanced diagnostics. Validated firmware images reduce integration surprises and allow teams to enable features that match their exact motion and safety architecture.

Common Misspellings

Internal Product Review

Bosch Rexroth Indramat's HCS01.1E-W0008-A-03-A-ET-EC-EC-S4-NN-FW stands out for its dual encoder inputs that enable redundant or parallel feedback schemes. This improves positional certainty and further smoothes coordinated multi-axis motion.

1620 Old Apex Road
Cary, NC 27513, USA

Toll Free: 1-888-551-3082
International: 1-919-443-0207

Fax: 1-919-867-6204

[email protected]

Shipping & Payment Options

Warranty

Indramat USA 1 Year Warranty

Repair

We offer a repair service for the HCS01.1E-W0008-A-03-A-ET-EC-EC-S4-NN-FW.

Exchange

Want to sell your HCS01.1E-W0008-A-03-A-ET-EC-EC-S4-NN-FW?

Quick Links

Terms and Policies

North Carolina Office

Indramat USA
1620 Old Apex Road
Cary, NC 27513
USA

Phone

Toll Free: 1-888-551-3082
International: 1-919-443-0207

Indramat USA sells factory new and pre-owned surplus products and maintains channels to procure supply. Indramat USA is not affiliated with nor an authorized distributor or representative of any manufacturers, brands or products listed. Designated trademarks, brand names, and brands appearing herein are the property of their respective owners.