R911347693 (HCS01.1E-W0018-A-02-A-CC-EC-DA-NN-NN-FW)

What thermal advantages result from “Air, internal (integrated blower)” cooling in this HCS Drive Controller?

Its blower circulates air across power electronics for stabilizing device temperature under continuous load while keeping the IP20 enclosure compact and service-accessible. It supports steady current delivery and predictable derating behavior in standard industrial climates.

Why is the wide mains range (3×AC 110…230 V ±10%) valuable on HCS01.1E-W0018-A-02-A-CC-EC-DA-NN-NN-FW?

It allows global deployment on common three-phase low-voltage supplies without transformer changes for simplifying spares and panel designs. Its ±10% tolerance helps the drive ride through feeder sag or tap variations during high-inertia starts.

How does the 18 A continuous/peak rating influence servo sizing and axis dynamics?

The 18 A capability supports mid-range torque demands and quick transient responses when paired with suitable motors for enabling crisp acceleration/braking on packaging infeeds, pick-place robots and light machine-tool axes. Its proper thermal utilization preserves current headroom for repetitive cycles.

How is “Power Supply Unit: infeeding/feeded” used in line-regenerative or DC-bus-sharing designs?

The infeeding mode supplies the DC link, while the feeded mode draws from a shared bus to let axes exchange energy and shrink braking resistors. Its coordinated DC-bus architectures improve efficiency in multi-axis machines.

How does pairing with Control Section Design ‘ADVANCED’ (A) affect setup of the HCS01.1E-W0018-A-02-A-CC-EC-DA-NN-NN-FW?

The ADVANCED section enables SERCOS III master (CCD) and richer diagnostics; factory-paired combinations streamline wiring and parameter templates in IndraWorks for faster bring-up and consistent behavior across axes.

HCS011EW0018A02ACCECDANNNNFW

HCS01 1E W0018 A 02 A CC EC DA NN NN FW

hcs01.1e-w0013-a-02-a-cc-ec-pb-s4-nn-fw

HCS1.1E-W0018-A-02-A-CC-EC-DA-NN-NN-FW

The Bosch Rexroth’s HCS controller HCS01.1E-W0018-A-02-A-CC-EC-DA-NN-NN-FW pairs an ADVANCED control section with SERCOS III cross-communication, IP20 housing and internal air cooling. It handles 3×AC 110…230 V ±10% and 18 A of maximum load current. This unit is designed for packaging, machine-tool, robotics and converting lines that needs synchronized multi-axis motion.