R911372301 (HCS01.1E-W0018-A-02-A-CC-EC-CN-NN-NN-FW)

HCS IndraDrive Controllers

HCS01.1E-W0018-A-02-A-CC-EC-CN-NN-NN-FW Series Image

In Stock, Shipping Varies

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone

Part Number

+Add a message

Message

Request a Replacement

Request a Repair

Quote Both

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone:
1-888-551-3082

Email:
[email protected]

The Bosch Rexroth drive controller, MPN R911372301 (HCS01.1E-W0018-A-02-A-CC-EC-CN-NN-NN-FW), features an integrated braking resistor, a power rating of 0.15 kW, and supports MSM, MCL, MSK, and MS2N motors. It operates with an internal air cooling method via blower, has an IP20 protection rating, and is designed for industrial environments with maximum ambient temperatures up to 55°C. The device provides SERCOS III master (cross communication) as its main communication interface, includes a multi-encoder interface supporting IndraDyn, Hiperface, and EnDat 2.1/2.2, and offers CANopen for additional connectivity. The unit is not equipped with an integrated safety interface and is not suitable for residential applications. It is intended to be used with an ADVANCED type control section (A) and must not be applied in unspecified contexts. Electrical connection requires 3-phase AC input at 110–230 V (±10%) and a peak device current of 18 A. The controller is supplied with mounting and connection components from the HAS09 kit and includes the HAP01.1A advanced control panel. Firmware must be ordered independently.

Technical Specifications

Discharging Time
30 minutes

Attachment
Type plate

Operating Temperature
No higher than 55 degree Celsius

Accessories
HAS09 mounting kit

Braking Resistor
0.15kW

Control Panel Fitting
HAP01.1A

Relay Type
Type 2

Compatible Motors
MSM, MCL, MSK, MS2N

Applications
Palletizing, pick-and-place, logistics

Protection Degree
IP 20

Interface
Multi-encoder for any standard encoder

Safety Technology
None

Size
215 x 50 mm

Supported Operation
Single-phase with derated performance

Encoder System Supply Voltage
Between V and 12V

Design
Economy design control section

Location of Operation
None residential area

Additional Requirement
Extra sensors and actuators

Order Delivery
Reputed freight carrier.

Frequently Asked Questions

What advantages does SERCOS III cross-communication bring to HCS01.1E-W0018-A-02-A-CC-EC-CN-NN-NN-FW motion networks?

It enables deterministic, synchronized exchange between drives and controllers with low jitter to support precise coordination of axes and diagnostics in real time. Its cross-communication reduces PLC load by allowing peer-to-peer status/data exchange over the ring.

How does the internal blower cooling influence cabinet design and lifetime for HCS01.1E-W0018-A-02-A-CC-EC-CN-NN-NN-FW?

The integrated fan routes air across heat-generating components for stabilizing temperature gradients and mitigating thermal cycling of power semiconductors. It often reduces external cooling hardware and simplifies ducting/clearances within IP20 control cabinets.

Which encoder systems are supported, and why does multi-encoder capability matter on this code?

The unit accepts IndraDyn feedback plus Hiperface and EnDat 2.1/2.2, with CANopen for additional devices. Its multi-encoder options streamline retrofits and enable optimized loop tuning across motor families and feedback resolutions.

What mains supply ranges and tolerances are permissible, and how do they affect commissioning?

It operates from 3×AC 110…230 V with ±10% tolerance to allow deployment in low-voltage three-phase environments without autotransformers. Its wider tolerance eases startup where line sag or inrush-induced dips occur.

Why is the “ADVANCED” control-section pairing significant, and what should integrators verify?

It pairs with the ADVANCED (A) control section for unlocking extended functions/interfaces beyond BASIC. It is important to verify the control section’s option cards and order firmware separately per the firmware sub-position note to enable intended features.

Common Misspellings

Internal Product Review

The Bosch Rexroth Indramat’s drive controller HCS01.1E-W0018-A-02-A-CC-EC-CN-NN-NN-FW integrates an ADVANCED control section with internal blower cooling and IP20 construction. It supports SERCOS III, CANopen and multi-encoder feedback. It features a rated peak current up to 18 A and operates from a 3×AC 110–230 V source. The unit's firmware can be ordered separately and its infeeding/feeded supply variants simplifies cabinet design.

1620 Old Apex Road
Cary, NC 27513, USA

Toll Free: 1-888-551-3082
International: 1-919-443-0207

Fax: 1-919-867-6204

[email protected]

Shipping & Payment Options

Warranty

Indramat USA 1 Year Warranty

Repair

We offer a repair service for the HCS01.1E-W0018-A-02-A-CC-EC-CN-NN-NN-FW.

Exchange

Want to sell your HCS01.1E-W0018-A-02-A-CC-EC-CN-NN-NN-FW?

Quick Links

Terms and Policies

North Carolina Office

Indramat USA
1620 Old Apex Road
Cary, NC 27513
USA

Phone

Toll Free: 1-888-551-3082
International: 1-919-443-0207

Indramat USA sells factory new and pre-owned surplus products and maintains channels to procure supply. Indramat USA is not affiliated with nor an authorized distributor or representative of any manufacturers, brands or products listed. Designated trademarks, brand names, and brands appearing herein are the property of their respective owners.