R911373467 (HCS01.1E-W0003-A-02-A-ET-EC-DA-NN-NN-FW)

Name: R911373467 (HCS01.1E-W0003-A-02-A-ET-EC-DA-NN-NN-FW)
Brand: Indramat Drives
SKU: HCS01.1E-W0003-A-02-A-ET-EC-DA-NN-NN-FW
Price: 371.00 USD

HCS IndraDrive Controllers

Call for Quote

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone

Part Number

+Add a message

Message

Request a Replacement

Request a Repair

Quote Both

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone:
1-888-551-3082

Email:
sales@indramat-usa.com

The Bosch Rexroth drive controller, MPN R911373467 (HCS01.1E-W0003-A-02-A-ET-EC-DA-NN-NN-FW), features a 50mm width, 215mm height, and 196mm depth, with a weight of 1.30kg. It supports a three-phase mains voltage range of 110–230 V AC (±10%) and delivers a continuous output current of 1.1 A with a peak current of 3 A. The device operates in environments from 0 to +40°C and up to 3000m altitude (with reduced performance above 1000m), and carries an IP20 protection class. It incorporates a MultiEthernet communication interface, analog/digital I/O extension (interface 2), and an encoder interface (IndraDyn Hiperface/EnDat 2.1/2.2). The controller uses internal air cooling via an integrated blower and is encased for protection against solid objects. It is designed for use with compatible Rexroth components and is built for environments graded as 3K3 as per EN 60721-3-3.

Technical Specifications

Product Type
Drive Controller

Width
50 mm

Height
215 mm

Depth
196 mm

Operating Temperature
0 to +40 degrees Celsius

Output Current Rating
1.1 A

Connection Type
Multi-Ethernet

Cooling Method
Built-in Air Blower

I/O Interface
Analog/Digital Extension Interface 2

Output Voltage Range
0 to 230 V

Housing Type
IP20

Weight
1.30 Kilos

Power Supply
Three-Phase 200 to 500 volts AC

Maximum Current Rating
3 A

Encoder Interface
Multi-Encoder Interface 1

Environmental Class
3K3

Relative Humidity
up to 95%

Altitude
Up to 3000 meters with derated performance

Frequently Asked Questions

What is the function of the Bosch Rexroth Indramat HCS01.1E-W0003-A-02-A-ET-EC-DA-NN-NN-FW controller in servo drive networks?

It controls torque, velocity, and position loops in coordinated servo axes, enabling deterministic synchronization with fieldbus-based multi-Ethernet systems.

Does the Bosch Rexroth Indramat HCS01 controller include integrated braking energy management?

Yes, it uses a shared DC bus configuration allowing regenerative energy absorption or feeding back through the infeeding unit for efficient energy recycling.

What communication protocols are supported by the HCS01.1E-W0003 controller for field connectivity?

It supports MultiEthernet with configurable interfaces for EtherNet/IP, EtherCAT, and PROFINET via firmware parameter selection.

What diagnostic tools are available for the Bosch Rexroth HCS01.1E controller during commissioning?

It utilizes IndraWorks software for parameterization, oscilloscope tracing, firmware flashing, and real-time communication diagnostics.

What is the typical switching frequency of IGBT modules in the HCS01.1E-W0003 controller?

The IGBT inverter operates between 4 kHz and 8 kHz depending on thermal derating and load-current spectrum.

Common Misspellings

HCS011EW0003A02AETECDANNNNFW

HCS01 1E W0003 A 02 A ET EC DA NN NN FW

hcs03.1e-w0210-a-05-lnnv

HCS1.1E-W0003-A-02-A-ET-EC-DA-NN-NN-FW

Internal Product Review

The Bosch Rexroth Indramat HCS01.1E-W0003-A-02-A-ET-EC-DA-NN-NN-FW controller comes from HCS drive controller series. It supports multi-Ethernet communication and features integrated air cooling with IP20 protection. It is ideal for automation and precise motion control in industrial systems.