R911373475 (HCS01.1E-W0018-A-03-A-ET-EC-DA-NN-NN-FW)

Name: R911373475 (HCS01.1E-W0018-A-03-A-ET-EC-DA-NN-NN-FW)
Brand: Indramat Drives
SKU: HCS01.1E-W0018-A-03-A-ET-EC-DA-NN-NN-FW
Price: 588.00 USD
Availability: InStock

HCS IndraDrive Controllers

Available, Ships in 1-2 weeks

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone

Part Number

+Add a message

Message

Request a Replacement

Request a Repair

Quote Both

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone:
1-888-551-3082

Email:
sales@indramat-usa.com

The R911373475 (HCS01.1E-W0018-A-03-A-ET-EC-DA-NN-NN-FW) is a Bosch Rexroth HCS01 drive controller with a MultiEthernet communication interface, supporting encoder interfaces including Hiperface, EnDat 2.1/2.2, 1Vpp, and TTL. This unit operates on a 3-phase AC mains voltage from 200 to 500 V ±10% and is designed for a device peak current of 18 A. The compact module measures 70 mm x 268 mm x 196 mm and employs internal air cooling via an integrated blower. Installation requires a 90 mm clearance above and below for heat dissipation. The controller conforms to IP20 protection and pollution degree 2. It is not equipped with a safety interface and must be paired with a control section of design 'BASIC' (B). The firmware must be ordered separately. Operation is specified in the temperature range of 0 to 40 °C.

Technical Specifications

Product Line
HCS01

Current Requirement
18A

Operating Temperature
0-40 degree Celsius

Compatible Devices
Hiperface, EnDat 2.1/2.2, 1Vpp, TTL

Interface Quantity
2

Dimensions
70mm x 268mm x 196mm

Pollution Degree
2

Heat Conduction Gap
90mm

Power Supply
Single or Three Phase AC

Voltage Supply
200-500 V with a 10% tolerance

Frequently Asked Questions

Does the firmware model affect setup when using BASIC control sections?

Yes, the firmware is ordered separately to match the BASIC control section. This modular approach supports scalable functionality and application-specific control adaptation.

How does HCS01.1E-W0018-A-03-A-ET-EC-DA-NN-NN-FW ensure proper thermal management under full-cycle operation?

It uses an internal blower cooling system to circulate air through the housing. This design enables continuous operation without external cooling, ideal for compact, high-load cabinets.

Can HCS01.1E-W0018-A-03-A-ET-EC-DA-NN-NN-FW support control networks requiring flexible protocol interoperability?

The MultiEthernet interface enables seamless switching across Ethernet/IP, PROFINET, and other protocols. This offers flexible integration for machines using diverse PLC platforms.

What enclosure protection is required to maintain drive reliability in exposed installations?

This model has an IP20 rating and minimal ingress protection. A sealed, filtered enclosure is essential for operation in dust-heavy or moisture-prone industrial environments.

How does the encoder interface affect commissioning with advanced servo feedback devices?

It supports IndraDyn, Hiperface, and EnDat 2.1/2.2 encoders. This allows precise, high-resolution position feedback across a variety of motor configurations.

Common Misspellings

HCS011EW0018A03AETECDANNNNFW

HCS01 1E W0018 A 03 A ET EC DA NN NN FW

hcs01.1e-w0018-a-02-b-et-ec-cn-l4-nn-fw

HCS1.1E-W0018-A-03-A-ET-EC-DA-NN-NN-FW

Internal Product Review

The Bosch Rexroth Indramat HCS01.1E-W0018-A-03-A-ET-EC-DA-NN-NN-FW drive controller delivers a peak current of 18 A. It offers MultiEthernet communication, a BASIC control section, integrated blower cooling, and a versatile encoder interface. It is built within an IP20-rated enclosure for protected operation.