R911374800 (HCS01.1E-W0018-A-03-B-ET-EC-NN-S5-NN-FW)
HCS IndraDrive Controllers
Technical Specifications
Product Type
Drive converter unit
Design
Space-saving
Technology
Safe motion technology
Compliance
IEC-complaint motion logic drive
Performance
Min. 250 us position controller and bus cycle
Power Supply
Rectifier
Cooling Method
Internal air cooling
Maximum Current
18 A
Continuous Operation
7 A
Applications
Printing, Packaging machines, Robotics
Power Supply Requirement
Three-phase AC 200–500 V
Brake Choppers
Yes
Maximum Braking Power
7.2 kW
Continuous Braking
0.05 kW
Frequently Asked Questions
What ambient temperature is supported during full load?
The maximum ambient temperature is 40°C under rated conditions, allowing stable operation without active cooling. The device must not be installed in high-heat environments without ventilation.
How does pollution degree 2 affect HCS01.1E-W0018-A-03-B-ET-EC-NN-S5-NN-FW?
The pollution degree 2 classification restricts usage to clean, dry industrial areas with minimal conductive contamination. The unit should be enclosed if installed in harsher ambient environments.
Why must grounding meet specific conductor size rules?
The grounding requirements address leakage currents over 3.5 mA to maintain electrical safety and system EMC compliance. The specified conductor sizes prevent hazardous faults and performance issues.
What are the spacing requirements for thermal airflow?
The controller requires 90 mm clearance above and below for proper ventilation during operation. The spacing prevents heat buildup that could degrade internal components over time.
Which environmental factors limit cabinet installation options?
The enclosure must protect against excessive dust, humidity, and temperature beyond rated limits to avoid damage. The controller’s reliability depends on compliance with environmental design constraints.
Common Misspellings
HCS011EW0018A03BETECNNS5NNFW
HCS01 1E W0018 A 03 B ET EC NN S5 NN FW
hcs01.1e-w0018-a-03-a-cc-ec-nn-s4-nn-fw
HCS1.1E-W0018-A-03-B-ET-EC-NN-S5-NN-FW
Internal Product Review
The HCS01.1E-W0018-A-03-B-ET-EC-NN-S5-NN-FW by Bosch Rexroth supports MultiEthernet communication, IP20 enclosure, internal air cooling, and runs off 3 × AC 200‑500 V with 18 A peak current. It integrates with the BASIC control section and includes Safe Motion (S5) functionality. It is ideal for packaging automation, assembly lines, and logistics systems.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the HCS01.1E-W0018-A-03-B-ET-EC-NN-S5-NN-FW.
Want to 
