R911382253 (HCS01.1E-W0018-A-03-A-ET-EC-NN-L3-NN-FW)
HCS IndraDrive Controllers
Technical Specifications
Protection Mechanism
External Housing against water
Pollution Degree
2
Function
Secondary Servo Drive
Application
Compact machines for wood machining
Analog Input
1 with +/-10V voltage rating, 14-bit resolution
Connection Point
X32
Connection Cable Feature
Inner Shield
Requirement
Ground Connection on Housing for functional safety
Mountings Supported
Back, Left-side, Right-side
Weight
1.7kg
Size
268 x 196 x 70 mm (H x T x B)
Instruction
Free from combustible materials above it
Supply Prioritization
24V supply before a DC bus voltage is applied
Power Supply Layout
Star Layout
Clearance Distance inside Housing
At least 90mm at the top and bottom
Mounting Location
Ideally, rear wall of control cabinet
Shipment
Through trustworthy logistics agents.
Frequently Asked Questions
Can HCS01.1E-W0018-A-03-A-ET-EC-NN-L3-NN-FW be deployed across machines using different Ethernet control platforms?
It features a MultiEthernet interface that supports various industrial Ethernet protocols. This simplifies network alignment across multi-vendor PLC environments without requiring hardware changes.
How does HCS01.1E-W0018-A-03-A-ET-EC-NN-L3-NN-FW handle servo shutdowns without disabling monitoring systems?
The STO safety interface removes torque without cutting control power. It enables machine-level safety compliance while maintaining communication and diagnostic functions.
What kind of encoder configuration does this controller support in closed-loop motion control?
It supports Encoder IndraDyn Hiperface and EnDat 2.1/2.2 interfaces. This allows accurate position feedback integration across both synchronous and asynchronous servo motors.
What cooling strategy supports long-duty cycles in high-density automation cabinets?
An internal blower cooling system circulates air over internal heat zones. This helps maintain thermal stability during prolonged high-current motion cycles.
Does the second interface channel support additional feedback or I/O expansion?
No, this model is not equipped with a second interface port. Encoder feedback and safety integration are handled exclusively via the primary encoder and STO interfaces.
Common Misspellings
HCS011EW0018A03AETECNNL3NNFW
HCS01 1E W0018 A 03 A ET EC NN L3 NN FW
hcs01.1e-w0018-a-02-b-et-ec-ec-nn-nn-fw
HCS1.1E-W0018-A-03-A-ET-EC-NN-L3-NN-FW
Internal Product Review
The Bosch Rexroth HCS01.1E-W0018-A-03-A-ET-EC-NN-L3-NN-FW is a drive controller built with STO safety for secure operation. It includes MultiEthernet connectivity, internal air cooling via blower, and a modular design for easy integration. It operates efficiently on 3 x AC 200–500 V mains voltage.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the HCS01.1E-W0018-A-03-A-ET-EC-NN-L3-NN-FW.
Want to 
