R911382718 (HCS01.1E-W0018-A-03-B-ET-EC-EC-SB-NN-FW)

HCS IndraDrive Controllers

HCS01.1E-W0018-A-03-B-ET-EC-EC-SB-NN-FW Series Image

Call For Quote

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone

Part Number

+Add a message

Message

Request a Replacement

Request a Repair

Quote Both

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone:
1-888-551-3082

Email:
[email protected]

The R911382718 (HCS01.1E-W0018-A-03-B-ET-EC-EC-SB-NN-FW) is a Bosch Rexroth HCS01 line series drive controller designed for rear panel mounting in control cabinets using two M6 x 20 screws. It operates with installed connectors only and features a ground conductor made from the same material as the outer conductors. The power supply cable requires a tightening torque of 0.5 Nm to 0.8 Nm. Key functions include Safe Motion Bus, IEC 61131-compliant digital I/O, and a display for system states and warnings. Safety includes short-circuit and overload protection. The device supports 3 x AC 200–500 V ±10% mains voltage, has an 18 A peak current, and utilizes internal air cooling via an integrated blower. It provides eight digital inputs, a 14-bit analog input with ±10V rating, MultiEthernet communication, and is paired with a BASIC control section. Both encoder interfaces support IndraDyn Hiperface/EnDat 2.1/2.2. Environmental tolerances are 5% to 95% relative humidity and vibration resistance up to 1g (57–150 Hz) per EN 60068-2-6 standards. Firmware must be ordered separately.

Technical Specifications

Mounting
Rear Panel

Fixing Screws
M6 x 20

Tightening Torque of Screws
6Nm

Control Section
Basic

Operation
Exclusively done using plugged-on connectors

Material of Equipment Grounding Conductor
Same as outer conductors

Tightening Torque of Cable
0.5Nm to 0.8Nm

Support
Safe Motion Bus

Digital Inputs/Outputs
Complies with IEC 61131

Current Consumption for Digital Inputs
2mA to 5mA

Protection
Overload and Short-circuit

Cable Requirement for Analog Inputs
Shielded if more than 30m

Humidity
5% to 95%

Vibration Sine Acceleration
1g at 57Hz to 150Hz

Transportation Temperature
-20°C to 70°C

Applications
Labeling, Digital and Label Printing

Number of Digital Inputs
8

Analog Input Voltage
+/-10V

Communication Module
Multi-Ethernet

Cooling Method
Internal Air Circulation

Delivery
Worldwide Network Logistics Agents

Frequently Asked Questions

Common Misspellings

Internal Product Review

The HCS01.1E‑W0018‑A‑03‑B‑ET‑EC‑EC‑SB‑NN‑FW by Rexroth Indramat is the drive controller that handles 3‑phase 200‑500 V AC and peaks at 18 A. It supports MultiEthernet communication, dual Hiperface/EnDat encoder interfaces, and includes a Safe Motion Bus (SB) safety function. It’s suitable for robotics, packaging, printing, CNC, and material‑handling systems.

1620 Old Apex Road
Cary, NC 27513, USA

Toll Free: 1-888-551-3082
International: 1-919-443-0207

Fax: 1-919-867-6204

[email protected]

Shipping & Payment Options

Warranty

Indramat USA 1 Year Warranty

Repair

We offer a repair service for the HCS01.1E-W0018-A-03-B-ET-EC-EC-SB-NN-FW.

Exchange

Want to sell your HCS01.1E-W0018-A-03-B-ET-EC-EC-SB-NN-FW?

Quick Links

Terms and Policies

North Carolina Office

Indramat USA
1620 Old Apex Road
Cary, NC 27513
USA

Phone

Toll Free: 1-888-551-3082
International: 1-919-443-0207

Indramat USA sells factory new and pre-owned surplus products and maintains channels to procure supply. Indramat USA is not affiliated with nor an authorized distributor or representative of any manufacturers, brands or products listed. Designated trademarks, brand names, and brands appearing herein are the property of their respective owners.