R911384634 (HCS01.1E-W0013-A-02-B-ET-EC-EP-S5-NN-FW)
HCS IndraDrive Controllers
Technical Specifications
Housing
Compact
Encoder Interface
Multi-encoder
Control Panel
One-line display unit with small keypad
Product Category
C3
Firmware Module
Not supplied with product
Connection Cables
Power cable, motor feedback cable
Frequently Asked Questions
Why pair the BASIC control section (“B”) with an IndraDyn Hiperface/EnDat encoder interface?
The BASIC section covers core axis control while the multi-encoder interface reads Hiperface®/EnDat 2.1/2.2 feedbacks for precise commutation and diagnostics. Its pairing balances capability and cost for mainstream servo tasks.
What cabinet and environmental considerations follow from the IP20 rating on product code HCS01.1E-W0013-A-02-B-ET-EC-EP-S5-NN-FW?
The IP20 means finger-safe but not dust-tight/water-proof, so the unit must be installed inside a protected electrical enclosure with appropriate filtration and climate control. It’s well-suited to clean industrial cabinets and machine control panels.
How does the integrated blower (internal air cooling) affect thermal performance and sizing?
The controller’s own fan drives airflow across heat-dissipating surfaces for keeping thermal resistance predictable without external heatsinks. Its panel designers can focus on cabinet airflow and ambient limits rather than device-mounted cooling hardware.
What motion-feedback options are practically enabled by the “Encoder IndraDyn Hiperface/EnDat 2.1/2.2” entry?
The interface supports digital absolute encoders common to Rexroth IndraDyn motors and many third-party servos for enabling electronic nameplate, multiturn position and robust serial diagnostics.It reduces wiring complexity compared with analog or resolver schemes.
What application boundaries should engineers consider when selecting the 13 A variant (product code HCS01.1E-W0013-A-02-B-ET-EC-EP-S5-NN-FW)?
It targets axes with modest continuous current and intermittent peaks to feed drives, indexers, pick-heads or labelers on 110–230 V cabinets.
Common Misspellings
HCS011EW0013A02BETECEPS5NNFW
HCS01 1E W0013 A 02 B ET EC EP S5 NN FW
hcs01.1e-w0009-a-02-e-s3-ec-nn-l4-aa-fw
HCS1.1E-W0013-A-02-B-ET-EC-EP-S5-NN-FW
Internal Product Review
The Bosch Rexroth Indramat’s HCS01.1E-W0013-A-02-B-ET-EC-EP-S5-NN-FW compact IndraDrive controller accepts 3-phase 110–230 V and delivers 13 A peak load current. Its MultiEthernet and IndraDyn Hiperface/EnDat interfaces streamlines integration. This drive comes with an internal-blower cooling system and it suits cabinet installation due to its IP20 construction in industrial systems like pick-and-place, machine tools and semiconductor handling.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the HCS01.1E-W0013-A-02-B-ET-EC-EP-S5-NN-FW.
Want to 
