R911387809 (HCS01.1E-W0003-A-02-B-ET-EC-NN-SB-NN-FW)

Name: R911387809 (HCS01.1E-W0003-A-02-B-ET-EC-NN-SB-NN-FW)
Brand: Indramat Drives
SKU: HCS01.1E-W0003-A-02-B-ET-EC-NN-SB-NN-FW
Price: 600.00 USD

HCS IndraDrive Controllers

Call for Quote

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone

Part Number

+Add a message

Message

Request a Replacement

Request a Repair

Quote Both

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone:
1-888-551-3082

Email:
sales@indramat-usa.com

The R911387809 (HCS01.1E-W0003-A-02-B-ET-EC-NN-SB-NN-FW) is a Bosch Rexroth HCS01 series drive controller with MultiEthernet communication interface and supports IEEE 802.3u standards. It operates with a control voltage input of 24V ±20% and accommodates mains voltages of 3 x AC 110...230 V ±10%. The controller provides seven digital inputs, including two probe-capable channels, and features a peak device current of 3 A. Mechanical dimensions are 215 x 196 x 50 mm with 1.3 kg mass, IP20 protection rating, and air cooling via an integrated blower. The unit includes an external electrolytic capacitor, rear overheating resistors, encoder interface (IndraDyn Hiperface/EnDat 2.1/2.2), and main power connectivity via terminal blocks. Control section design is BASIC (Type B) and firmware must be ordered separately.

Technical Specifications

Rated Control Voltage Input
24V +/-20%

Frequency Converter Capability
Yes

Parallel Connection
Supported with similar devices

Control Panel Type Plate
Separate

Firmware Type Plate
Separate

Transportation Temperature Range
-20°C to 70°C

Additional Features
hot breaking resistors at the rear

Mounting
Right-hand or Left-hand

Fixing Screws
Two M6 x 20 with 6Nm tightening torque

Weight
1.3 kg

Size
215 x 196 x 50 mm (H x T x B)

Equipment Grounding Connection
8 AWG copper wire

Terminal Block
Three terminals

Mains Power Supply Connection
X5 point

Short Circuit Current Rating
42000A

Backup Support
1 year

Ethernet Fieldbus Systems Compatibility
Supported

Ethernet Communication Standards
IEEE 802.3u

Digital Inputs
Seven (Two can be configured as probe inputs)

Frequently Asked Questions

What is the operational voltage range of the Bosch Rexroth Indramat HCS01.1E-W0003-A-02-B-ET-EC-NN-SB-NN-FW controller?

It operates from 110 V to 230 V AC, accommodating both single and three-phase supplies with a ±10% voltage tolerance for stable control operation.

How does the HCS01.1E-W0003-A-02-B-ET-EC-NN-SB-NN-FW controller handle input frequency variation?

It tolerates ±2 Hz deviation within the 50–60 Hz frequency band, ensuring precise performance under slight mains fluctuations per UL 508C standard.

What short-circuit current rating applies to the Bosch Rexroth Indramat controller HCS01.1E-W0003-A-02-B-ET-EC-NN-SB-NN-FW?

The controller is rated at 42,000 A rms SCCR, enabling safe operation in high-fault-current industrial networks without component damage.

Does the Bosch Rexroth Indramat HCS01.1E-W0003-A-02-B-ET-EC-NN-SB-NN-FW controller support UL certification?

Yes, the controller is UL Listed under file E134201, validating it for industrial use with compliance to UL 508C performance parameters.

How is pollution degree 2 defined for this Bosch Rexroth Indramat HCS01.1E controller?

The pollution degree 2 indicates the controller is suitable for environments where only non-conductive contamination occurs, except under temporary condensation.

Common Misspellings

HCS011EW0003A02BETECNNSBNNFW

HCS01 1E W0003 A 02 B ET EC NN SB NN FW

hcs04.2e-w0390-n-06-nnnn

HCS1.1E-W0003-A-02-B-ET-EC-NN-SB-NN-FW

Internal Product Review

The Bosch Rexroth Indramat HCS series controller with model HCS01.1E-W0003-A-02-B-ET-EC-NN-SB-NN-FW is a compact drive control. It supports 50–60 Hz frequency and a SCCR of 42 kA rms current for short circuit. It is commonly used in automation lines to ensure dependable control with CSA and UL safety.